
Canopus · Metal Shell
Canopus Patina Solid Brass Snare Drum
A 14 by 6.5 in snare on a 2 mm solid brass shell, hand-hammered and given a corrosion-style patina finish in the manner of an aged cymbal. Canopus reports a short sustain with emphasised low frequencies and a strong mid-range, and notes that the patina comes out differently on every drum.
Two millimetres of brass
Most brass snare shells sit between 1 mm and 1.5 mm. At 2 mm this one is heavy, and Canopus describes what that buys: resonance that holds up at every playing level, a full tone, and a wide volume range rather than a narrow sweet spot.
The finish is a treatment, not a colour
The patina is a deliberate corrosion-style surface treatment, the same idea as the patina finishes that appear on vintage cymbals. It is applied rather than waited for, and the company states plainly that no two drums come out alike. Underneath it, hand-hammering controls the high harmonics, which is what keeps a 2 mm brass shell from being relentless.
The result Canopus reports is a short sustain with emphasised lows and a mid-range that stays present — an unusual combination for a shell this heavy.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Solid brass1 |
| Construction | 2 mm solid brass, hand-hammered1 |
| Finish | Patina, applied by surface treatment; appearance varies drum to drum1 |
| Hardware | |
| Hoops | Die-cast1 |
| Lugs | Black1 |
| Snare side | |
| Snare wires | Canopus Vintage Snare Wire1 |
| Origin | |
| Made in | Japan1* |
| model | |
| Model number | SMB2-14651 |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec