Drum Atlas
Menu

Cadeson · Prestige

Cadeson Prestige Sylvio Gualda Snare (DBSS-G134)

  • Snare drum
  • pro
  • current

The DBSS-G134 is Cadeson's Prestige concert snare, designed with the French percussionist Sylvio Gualda: a 13 by 4⅛ inch drum on a maple, walnut, birch and cherry shell, with chrome-plated die-cast zinc hoops, stainless tension rods, DBL lugs, an MS3-12A high-model strainer and traditional metallic wires.

Updated 2026-09-24Sources

Four and an eighth inches

The depth is the specification that explains the drum. 4⅛ inches on a 13-inch diameter is shallow, and shallow is the concert snare’s traditional shape.

A shallow shell holds less air behind the batter head, so there is less low frequency to get in the way and the drum responds faster. What you lose is body; what you gain is articulation. In an orchestral context where a snare part is often a roll that has to stay even at pianissimo and then crack at fortissimo, articulation is the whole job.

Thirteen inches rather than fourteen tightens it further. Smaller head, higher tuning for the same tension, and a stick response that returns quicker under the hand.

A shell of four woods

Maple, walnut, birch and cherry in one shell is an unusual recipe, and each is contributing something different.

Maple is the neutral reference with a full low end. Birch is harder and naturally scooped — it emphasises high and low over the midrange, which is why it is the studio wood. Walnut is dense and dark, adding weight to the fundamental. Cherry is lighter than all three, bright and quick.

Mixing them across the plies is a way of building a shell whose response is flat across a wide band rather than characterful in one region — again, exactly what a concert drum is asked for.

Die-cast hoops and a high strainer

Die-cast zinc hoops are heavier and stiffer than triple-flanged steel. They hold their shape under tension, which means tuning stays where it was put and the head sits evenly all the way round. Concert players choose them for consistency rather than for tone.

The strainer is the MS3-12A high model. A high-model strainer sits proud of the shell, giving the throw-off lever more travel and putting the adjustment screw within easy reach — useful in a pit, where the drum is often behind the player rather than in front.

The tension rods are stainless rather than plated steel, which is a small and rarely-listed specification that shows up years later, after the drum has lived in an unheated hall.

Sylvio Gualda

Gualda is the French percussionist for whom Iannis Xenakis wrote Psappha, and one of the central figures in the twentieth-century solo percussion repertoire.

That his name is on a Taiwanese factory’s concert snare is worth recording on its own. Cadeson has been building percussion since the mid-1980s and makes its own components in house; a collaboration at this end of the classical world is a different proposition from the OEM work Taiwanese factories are better known for.

Specifications

Specifications
AttributeValue
Shell
Shell materialMaple / walnut / birch / cherry1
Hardware
HoopsDie-cast zinc, chrome plated1
Tension rodsStainless steel1
LugsDBL1
StrainerMS3-12A, high model1
Snare side
Snare wiresMetallic traditional1
Origin
Made inTaiwan2*Cadeson's product page does not state a country; the company's own site describes it as manufacturing in Taiwan.
model
Model numberDBSS-G1341
Designed withProf. Sylvio Gualda1
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Snare Drum 13" x 4 1/8" Prestige Series (DBSS-G134)

    Cadeson · accessed 2026-09-24

  2. 2Tier 1 · Primarymanufacturer spec

    Cadeson Music Group — products

    Cadeson · accessed 2026-09-24