
C&C Drum Co. · Maple Gum
C&C Maple Gum Snare
A 6 mm six-ply maple, gum and maple shell with different bearing edges on each side: a Bread & Butter edge on the batter and a Full Contact edge on the resonant. The inner maple ply runs horizontally for strength and brightness. Fitted with 3 mm triple-flanged hoops and C&C Deco lugs.
Two different edges on one drum
Most shells are cut the same way top and bottom. Maple Gum is not. The batter side gets C&C’s Bread & Butter edge, and the resonant side gets a Full Contact edge — a broader, flatter profile that lays more wood against the head. The company’s stated reason is a wider tuning range and better consistency across the frequency spectrum, and the logic holds: the two heads are doing different jobs, so there is no reason the edges under them should match.
Gum in the middle
Sweet gum is an unusual shell wood, dense and interlocked, and C&C sandwiches it between maple. The inner maple ply runs horizontally, which stiffens the shell and adds brightness — a counterweight to a middle ply that would otherwise sit low.
The company’s own summary of the line is loud, vintage 1960s and 1970s with ample low end, which is a fair description of what a 6 mm six-ply shell on wide edges does.
3 mm triple-flanged hoops are standard here rather than the 2.3 mm used on 12th & Vine.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Maple and gum1 |
| Plies | 61 |
| Construction | 6-ply maple, gum and maple, 6 mm, with the inner maple ply running horizontally1 |
| Bearing edges | Bread & Butter on the batter side; Full Contact on the resonant side1 |
| Hardware | |
| Lugs | C&C Deco1 |
| Hoops | 3 mm triple-flanged1 |
| Strainer | Deluxe Classic1 |
| Origin | |
| Made in | United States1* |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec