
Brady · Ply
Brady Ply Shell Snare
Brady's ply snare, a quarter of an inch thick and built from ten plies. The jarrah version carried a single outer ply of brush box; the marri version was marri throughout, face veneer included. Ten solid brass double-ended pipe lugs, 2.3 mm Super-hoops and a piston strainer, at 14 by 6.5 in.
Ten plies of Australian timber
Brady’s ply shells were a quarter of an inch thick across ten plies, which is a heavy build by any measure and heavier still in eucalypt. The company used its own local hardwoods where almost everyone else used maple or birch, and the results are a genuinely different set of voices rather than variations on a familiar one.
Two recipes
The jarrah drum was jarrah plies under a single outer ply of brush box — a paler, finer-grained Australian hardwood that took the gloss finish. The marri drum was marri all the way through, including the face veneer, and was finished satin.
Fittings and afterlife
Ten double-ended pipe lugs machined from solid brass, 2.3 mm Super-hoops, a Nickel Drumworks piston strainer and 20-strand German wire, at 14 by 6.5 in.
Brady announced its closure in November 2015. Chris Brady kept the trademark and said he would build the occasional drum as his health allowed, but production ended, and these drums now change hands used.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Jarrah with a brush box outer ply, or marri throughout1*Measured and stated in the MusicRadar review of five Brady snare drums, not by the maker. |
| Plies | 101*Measured and stated in the MusicRadar review of five Brady snare drums, not by the maker. |
| Construction | 10-ply shell, a quarter of an inch thick1*Measured and stated in the MusicRadar review of five Brady snare drums, not by the maker. |
| Finish | Gloss on the jarrah; satin on the marri1*Measured and stated in the MusicRadar review of five Brady snare drums, not by the maker. |
| Hardware | |
| Lugs | 10 custom double-ended pipe lugs, machined from solid brass1*Measured and stated in the MusicRadar review of five Brady snare drums, not by the maker. |
| Hoops | Super-hoop, 2.3 mm1*Measured and stated in the MusicRadar review of five Brady snare drums, not by the maker. |
| Strainer | Nickel Drumworks piston1*Measured and stated in the MusicRadar review of five Brady snare drums, not by the maker. |
| Snare side | |
| Snare wires | 20 strand custom German wire1*Measured and stated in the MusicRadar review of five Brady snare drums, not by the maker. |
| Origin | |
| Made in | Australia1*Measured and stated in the MusicRadar review of five Brady snare drums, not by the maker. |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Reported shortcomings
Collected from owner reports, forum threads and reviews. These are what players say about the Brady Ply Shell Snare — not measurements we have taken, and not necessarily typical. A problem appearing here does not mean it will affect yours.
A few owners have mentioned that the marri ply drum reads a little brighter and less full than the jarrah1
Sources
Numbered footnotes in the spec table point here.
- 1Tier 2 · Higheditorial