
Brady · Block
Brady Block Shell Snare
Brady's block shell: solid tongue-and-groove sections of Australian hardwood, assembled into a wall about twice the thickness of the company's ply shells. Jarrah, sheoak and Tasmanian blackwood were all built. Ten double-ended pipe lugs machined from solid brass, 2.3 mm Super-hoops and a piston strainer, at 14 by 6.5 in.
Blocks, not staves
A block shell is built from solid sections joined edge to edge with tongue-and-groove joints, and it sits between a stave shell and a true solid one. Chris Brady’s block drums are notably thick — the MusicRadar review puts the wall at roughly twice that of his ply shells — which makes them heavy, stiff and loud.
Australian hardwoods
The species are the reason these drums are remembered. Jarrah is the flagship: a dense West Australian eucalypt, reddish, with an interlocking grain that lengthens sustain. Sheoak comes in with a flame figure; Tasmanian blackwood is the darker, more even of the three.
Fittings
The review lists ten custom double-ended pipe lugs machined from solid brass, 2.3 mm Super-hoops, a Nickel Drumworks piston strainer and 20-strand custom German wire, on a 14 by 6.5 in shell.
Brady closed in November 2015, when Chris Brady’s health made continuing impossible, and the family kept the trademark. The drums appear on the used market rather than in dealers’ new stock.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Jarrah, sheoak or Tasmanian blackwood1*Measured and stated in the MusicRadar review of five Brady snare drums, not by the maker. |
| Construction | Solid tongue-and-groove blocks, about twice the wall thickness of the Brady ply shells1*Measured and stated in the MusicRadar review of five Brady snare drums, not by the maker. |
| Hardware | |
| Lugs | 10 custom double-ended pipe lugs, machined from solid brass1*Measured and stated in the MusicRadar review of five Brady snare drums, not by the maker. |
| Hoops | Super-hoop, 2.3 mm1*Measured and stated in the MusicRadar review of five Brady snare drums, not by the maker. |
| Strainer | Nickel Drumworks piston1*Measured and stated in the MusicRadar review of five Brady snare drums, not by the maker. |
| Snare side | |
| Snare wires | 20 strand custom German wire1*Measured and stated in the MusicRadar review of five Brady snare drums, not by the maker. |
| Origin | |
| Made in | Australia1*Measured and stated in the MusicRadar review of five Brady snare drums, not by the maker. |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Reported shortcomings
Collected from owner reports, forum threads and reviews. These are what players say about the Brady Block Shell Snare — not measurements we have taken, and not necessarily typical. A problem appearing here does not mean it will affect yours.
A few owners have mentioned that the sheoak shell shows a slight lack of warmth next to the jarrah1
Sources
Numbered footnotes in the spec table point here.
- 1Tier 2 · Higheditorial