
A&F Drum Co · Rude Boy
A&F Rude Boy Snare
A six-lug metal side snare only three inches deep, offered at 10, 12 and 13 in diameter. A&F cuts, rolls, welds and sands the shell in its own shop and treats brass and copper with its patina formula to start the ageing. The drums weigh between seven and nine pounds, and lead time is sixteen weeks.
Three inches, six lugs
The Rude Boy is a side snare reduced to essentials. Three inches of depth in 10, 12 or 13 in diameter, and only six lugs holding the head down, which keeps the hardware light and leaves a great deal of unsupported hoop between tension points. On a shallow metal shell that produces a loose, fast, slightly untidy crack — the sound the drum is bought for.
The patina is applied, not waited for
A&F cuts, rolls, welds and sands its own shells, and then treats the brass and copper ones with a formula that starts the oxidation deliberately. The drums leave the shop already looking used, and go on ageing from there. Aluminium and steel are offered raw without the treatment.
The weight is published, which is unusual and useful: seven to nine pounds depending on the size, which is heavy for a drum this shallow and tells you how thick the shell is.
Lead time is sixteen weeks.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Buyer's choice — raw brass, aluminium, steel or copper1 |
| Construction | Hand cut, rolled, welded and sanded in the A&F shop1 |
| Finish | Raw; brass and copper treated with the A&F patina formula1 |
| Hardware | |
| Lugs | 6, centre-mounted raw brass1 |
| Hoops | Raw brass1 |
| Origin | |
| Made in | United States — Austin, Texas1*Austin is stated across the maker site rather than on this product page. |
| model | |
| Lead time | 16 weeks, built to order1 |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec