Drum Atlas
Menu

A&F Drum Co · Pancake

A&F Pancake Snare

  • Snare drum
  • custom
  • current

The Pancake is a snare drum an inch and a half deep. Raw brass shell and raw brass hoops, both handmade, with single-tension rods held by clips and a beer tap for a throw-off. At that depth it behaves less like a snare drum and more like a piece of percussion that happens to have wires.

Updated 2026-09-13Sources

Where it came from

Ramy Antoun, A&F’s founder, was playing with Seal in 2003 and wanted to get the sound of an electronic drum loop out of an acoustic drum on stage. What he assembled was a 1920s banjo, a vintage brass shell and hoops, and Remo heads.

That is the whole design, and it explains the proportions. A drum an inch and a half deep has almost no air in it to resonate, so it does not behave like a snare drum that has been made shallow — it behaves like a different instrument that happens to have wires under it.

Specifications

Specifications
AttributeValue
Shell
Shell materialRaw brass, handmade1
Hardware
HoopsRaw brass, handmade1
TuningSingle tension rods with clips1
Throw-off and butt plateBeer tap1
Heads
HeadsRemo1

Hear it

Videos are embedded from YouTube and belong to their creators. Nothing loads until you press play.

A&F Drum Co. Pancake Snare Drum — demo

Gear4music Guitars

A&F Drum Co. "Pancake Snare"

A&F Drum Co.

Ramy Antoun on the 1.5 × 14 raw brass, single tension, no lugs.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 2 · Highretailer listing

    A&F Drum Co. Pancake snare drums

    Long & McQuade · accessed 2026-09-13

  2. 2Tier 2 · Highretailer listing

    Cymbal and drum collections

    Drum Center of Portsmouth · accessed 2026-09-13