A 4 by 6 in snare with an internal snare mechanism and an L-arm bracket, so it mounts off a stand rather than sitting in a basket. Made from the same hand-rolled raw brass, copper or steel as the rest of the A&F catalogue, with the shop's centre-mounted brass lugs, and weighing three and a half pounds.
Small enough to need a different mechanism
At 6 in across there is no room on the shell for a conventional throw-off and butt plate, so this drum carries its snare mechanism inside. That is how the tiny effect snares of the early twentieth century worked, and it is the only practical answer at this diameter.
The mounting follows the same logic: an L-arm bracket rather than legs or a basket, so the drum hangs off a stand wherever the player wants it.
The same shell, scaled down
Everything else is standard A&F. The shell is hand cut, rolled, welded and sanded from raw brass, copper or steel, with the brass and copper treated to start the patina. The lugs are the company’s patented centre-mounted brass ones, and the heads are Remo Ambassadors.
It weighs three and a half pounds, and the shop quotes twenty weeks — longer than its full-size drums, which is what small work usually costs.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Buyer's choice — raw brass, steel or copper1 |
| Construction | Hand cut, rolled, welded and sanded in the A&F shop1 |
| Finish | Raw; brass and copper treated with the A&F patina formula1 |
| Hardware | |
| Mounting | L-arm bracket1 |
| Lugs | Centre-mounted raw brass1 |
| Snare side | |
| Snare system | Internal mechanism1 |
| model | |
| Lead time | 20 weeks, built to order1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
