Drum Atlas
Menu

Yamaha · FP9 Series

Yamaha FP-9C Double Chain Pedal

  • Pedal
  • flagship
  • current

The Yamaha FP-9C is the double-chain member of the FP9 family, with a quick-adjusting cam, an axle-stabilizing bearing chamber and a low-profile stabilizing hinge. Beater and footboard angles set independently, the spring adjustment auto-locks, the beater is weight-adjustable, and a case is included. Double version DFP-9C.

Updated 2026-09-24Sources

One chassis, two drives

The FP-9C and the FP-9D are the same pedal with a different thing in the middle. Bearing chamber, hinge, spring mechanism, beater, independent angle adjustments, anti-skid heel, case — identical.

That makes Yamaha’s flagship a genuine either/or rather than a ladder. You are not choosing between a better pedal and a cheaper one; you are choosing whether a chain sits between your foot and the beater.

What the chain does here

A chain has mass and it has a small amount of give at every link pin. Both of those are usually described as losses, and on a pedal this well supported they read differently.

The give takes the hardest edge off the moment the drive engages, so the top of the stroke feels cushioned rather than instant. The mass adds flywheel: once the chain is moving, it helps carry the beater through, which is part of why chain pedals are described as having more weight behind the note.

Neither is better. A player who wants to feel exactly where the beater is takes the D; a player who wants the drive to smooth out the variation in their own stroke takes the C.

Quick-adjusting cam

The cam’s shape decides whether the beater tracks the footboard evenly or accelerates through the stroke — the choice other makers label round against offset.

Making it quick-adjusting rather than a bolt-off sprocket is the same reasoning as the FP-9D’s quick-adjusting link: an adjustment that takes tools and time is an adjustment nobody makes twice.

Left-footed, catalogued

Yamaha lists the DFP-9CL, a left-footed version of the double. That is worth noting because a left-footed double is not simply a mirror — the slave and the primary swap sides, the shaft runs the other way, and the hoop clamp and universal joint have to be built for it.

Tama catalogues left-footed versions of the Iron Cobra and Speed Cobra twins for the same reason. It is a small part of the market that has historically been served by asking a technician, and a factory option is a better answer.

Anti-skid heel spikes

Every pedal creeps forward. The hoop clamp holds the front; the back of the base plate is standing on whatever the floor happens to be.

Spikes in the heel bite into carpet, which is what most kits stand on, and give the base something to push against rather than slide on. On a hard stage they matter less — that is what the rubber around them is for — but on a carpeted riser they are the difference between a pedal that stays under your foot and one you are chasing by the third song.

Specifications

Specifications
AttributeValue
Pedal
DriveDouble chain1
CamQuick adjusting1
AxleAxle-stabilizing bearing chamber; ball-bearing drive connection1
Heel hingeLow-profile stabilizing hinge1
SpringEasy-access, auto-lock adjustment1
BeaterWeight adjustable1
AdjustmentsIndependent beater and footboard angle1
HeelAnti-skid spikes1
Supplied withCarrying case1
Double versionsDFP-9C, and DFP-9CL left-footed — all-bearing universal joint and secondary pedal anchor1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    FP9 Series — Overview

    Yamaha · accessed 2026-09-24