Tama · Classic
Tama The Classic Pedal HP50
The Tama HP50 is a chain-drive bass pedal cut down to a compact, folding frame in the manner of the pedals of the 1960s. Spring tension is set from a post on top of the frame while seated, the hoop clamp tightens from outside the frame, and the footboard angle is set by moving the chain's position on the sprocket, independently of the beater angle.
Catalogue record. This entry carries specifications and their sources, and no written assessment — nobody has written one yet. Everything in the table below is sourced and marked the same way as anywhere else on the site. For entries that explain the design rather than only record it, see the anatomy pages or any model marked as a full entry.
Specifications
| Attribute | Value |
|---|---|
| Pedal | |
| Configuration | Single (HP50)1 |
| Drive | Chain — footboard angle is set by moving the chain's position on the sprocket1 |
| Spring | Easy Access Spring Adjustment — tension set from a post on top of the frame while seated1 |
| Footboard | Lightweight, smooth surface; angle adjustable independently of the beater angle1 |
| Beater | Classic Beater; angle set with a drum key, shaft height by the square-head bolt on the side pillar1 |
| Hoop clamp | Easy-Tight — the screw sits outside the pedal frame1 |
| Frame | Compact folding design, packs into a pedal bag1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec