Drum Atlas
Menu

DW · 5000 Series

DW 5000HL Heel-Less Pedal

  • Pedal
  • pro
  • current

The DW 5000HL is a 5000 Series bass pedal without a heel plate: a unique base plate with an integrated Delta ball-bearing hinge carries a slightly truncated footboard that meets the floor directly. It keeps the dual-chain Accelerator cam, dual spring rocker and Tri-Pivot toe clamp. Developed with educator Mike Packer.

Updated 2026-09-24Sources

What the heel plate was doing

On a conventional pedal the footboard hinges off a raised heel plate, so the board sits at an angle above the floor even at rest and your heel rests on metal.

Take the plate away and the board’s lower end comes down to the floor itself. The board gets shorter, the resting angle gets shallower, and the heel of your foot lands on the ground rather than on the pedal.

Who that suits

Heel-up players — the majority in loud music — already spend the whole gig with the heel off the board. For them the heel plate is a platform they never use, carrying height they would rather not have.

Lowering the board lowers the whole pivot geometry. The ankle works through a smaller arc, the foot sits flatter, and the leg is doing more of its work from the hip. Players who get calf fatigue from a steeply angled board often find that changes first.

Heel-down playing is still possible; the heel simply meets the floor instead of the pedal, which is a different feel and takes some acclimatising.

What it keeps from the 5000

Everything in the drivetrain. Dual-chain Accelerator cam — the eccentric sprocket that shortens the stroke and raises footboard velocity through it. Dual-bearing spring rocker, so the spring follows the stroke instead of fighting across it. Tri-Pivot toe clamp, with three self-aligning rubber pads that grip a hoop of any thickness from above and below.

This is a 5000 pedal with a different relationship to the floor, not a different pedal. If you know how a 5000 responds, you know how this responds — from a lower starting point.

The base plate is the design

Removing a heel plate sounds like subtraction, and it is not: the hinge has to go somewhere, and here it is integrated into a purpose-made base plate rather than bolted to a riser.

That is also why it is not a modification you make to a standard 5000. The pivot, the board length and the plate are one design, developed with Los Angeles educator Mike Packer, and it works because all three moved together.

Specifications

Specifications
AttributeValue
Pedal
ConfigurationSingle (DWCP5000HL) or double (DWCP5002HL)1
DriveDual chain, Accelerator1
CamAccelerator1
FootboardHeel-less — truncated board meeting the floor, no heel plate1
Heel hingeDelta ball-bearing hinge integrated into the base plate, US Patent 54310811
SpringDual-bearing spring rocker1
Hoop clampTri-Pivot toe clamp, side-adjusting1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    DW 5000 Series Heelless Bass Pedal — DWCP5000HL

    Drum Workshop · accessed 2026-09-24