Vic Firth · American Custom Keyboard
Vic Firth American Custom M1 Keyboard Mallet
The Vic Firth M1 is a keyboard mallet with a soft round teal synthetic-yarn head on a 16-inch birch handle. It is the soft end of the American Custom keyboard range’s yarn models.
What a keyboard mallet has to decide
A marimba, xylophone, vibraphone or glockenspiel is a set of tuned bars, and a bar struck by anything produces two sounds at once: its fundamental, which is the note written, and a spray of upper partials, which on a tuned bar are not harmonically related to it.
The mallet decides the ratio. A soft head compresses on impact, so the contact lasts longer, the high partials are suppressed, and what comes back is mostly the note. A hard head barely compresses, the contact is brief, and the partials survive — which on a xylophone or glockenspiel is the bright, glassy sound those instruments are played for, and on a marimba is usually a mistake.
So hardness is not a volume control. It changes which instrument the mallet is for.
Where the M1 sits
Vic Firth’s American Custom keyboard range is a hardness ladder running from extra soft yarn through rubber and poly to phenolic and brass, and the M1 is near the soft end: soft, round, synthetic yarn.
Yarn-wound heads are the marimba’s own category. The wrap is thick enough to compress substantially, so the bar’s fundamental dominates and the rosewood’s warmth comes through — which is the whole sound of the instrument.
Soft, and what it is for
Soft playing, as Vic Firth say, and that is more specific than it sounds.
A soft mallet does not merely play quietly; it produces the roundest sound the bar can make at any volume, because the suppressed partials are suppressed whether the stroke is loud or quiet. On the low bars of a marimba — which are long, slow to respond and rich in fundamental — that is exactly right.
It is also why a soft mallet struggles on a glockenspiel. The partials are what make those bars speak, and a soft head removes them.
The colour code
Teal for the M1, red for the M2, yellow for the M3, purple for the M4. Keyboard mallets are identified by head colour because a player carrying six pairs needs to find the right one by eye in a dark pit, mid-piece.
It is a practical convention rather than decoration, and it is near-universal across makers — though the colours themselves are not standardised between them.
Birch handles
The whole American Custom keyboard range uses 16-inch birch. Birch is light and has a little flex, which helps a keyboard player: some give in the shaft smooths the stroke on a hard bar, and a light mallet is less tiring across a long passage of four-mallet writing.
Rattan is the traditional alternative and flexes more. Birch is stiffer and more consistent from pair to pair, which is the trade.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
M1 — American Custom Keyboard — Soft, Teal Synthetic Yarn Mallets