Drum Atlas
Menu

Tama · Iron Cobra 900

Tama Iron Cobra Lever Glide Hi-Hat Stand

  • Hardware
  • pro
  • current

The Tama HH905 is a double-braced hi-hat stand using a lever-glide mechanism rather than a direct pull rod, giving a light, quiet action. It carries a six-way tension adjustment, a tilting base for expressive work and a Quick-Set clutch. Available two-leg (HH905N) and dual-leg (HH905D).

Updated 2026-09-11Sources

Two legs or three

This is the decision that matters and it is not about stability.

A three-leg stand is the default and it is fine until you play double bass, at which point one of those legs is exactly where the left pedal wants to be. A two-leg stand moves the problem out of the way. That is the entire reason the two-leg configuration exists.

If you play a single pedal, take the three-leg version — it is more stable and cheaper. If you play doubles, or you set your hi-hat unusually close, the two-leg pays for itself immediately.

What lever glide changes

Most hi-hat stands pull the rod directly: the footboard is connected to the pull rod through a simple linkage, so the whole weight of the top cymbal is on your foot the entire time. Tama’s lever mechanism changes the leverage through the stroke, which makes the action lighter at the top and quieter throughout.

Quiet matters more than it sounds. A hi-hat stand that clanks is audible on close mics and there is nothing to be done about it after the fact.

The bit people forget

The six-way tension adjustment is the most useful feature on the stand and almost nobody touches it. It sets how hard the spring fights your foot. Set too tight, fast patterns become exhausting; too loose and the chick loses definition.

Spend ten minutes with it once. It changes the feel more than a new pair of hi-hats would.

Specifications

Specifications
AttributeValue
Hardware
TypeHi-hat stand1
ActionLever Glide1
LegsDouble-braced; two-leg (HH905N) or dual-leg (HH905D)1
Tension adjustmentSix-way2
BaseTilting, for expressive hi-hat work2
ClutchQuick-Set2

Where to find it

Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Iron Cobra 900 Lever Glide Hi-Hat Stand — HH905D

    Tama · accessed 2026-09-11

  2. 2Tier 2 · Highretailer listing

    Tama HH905N Hi-hat Stand

    Sweetwater · accessed 2026-09-11