Drum Atlas
Menu

SKB · Roto-Molded Drum Cases

SKB 10 x 12 Tom Case (1SKB-D1012)

  • Hardware
  • pro
  • current

The 1SKB-D1012 is SKB's roto-moulded rack tom case, with a 14.5-inch interior diameter and 12 inches of interior depth — sized so a 10-inch drum up to 12 deep travels with its mounting hardware fitted. It carries the same Roto-X stacking pattern, pedestal feet, padded lining and lifetime warranty as the rest of the range.

Updated 2026-09-24Sources

The four and a half inches that matter

A 10-inch tom in a 14.5-inch interior has more than two inches of clearance all the way round. That is not padding generosity — it is the room a tom mount needs.

Rack toms travel with an L-arm bracket or a suspension mount bolted to the shell, and a case cut tight to the drum means taking the mount off at every load-out and putting it back on at every load-in. Both operations are done in a hurry, both involve a hex key, and one of them ends with a bracket left on a stage.

Twelve inches of interior depth does the same thing in the other axis: a 10 by 8 drum goes in with the arm still attached and pointing up.

Sizing by the case, not by the drum

SKB names the case by what it holds rather than by the drum it is for, which is why the model number reads 1SKB-D1012 — a depth-and-diameter pair, not a drum size.

Worth reading carefully when ordering. The relevant number is the largest drum you will ever put in it, with its hardware on, and the range steps in the usual tom sizes above and below this one.

Same shell, smaller

Everything structural is shared with the snare case: one seamless roto-moulded piece, the Roto-X relief so a stack interlocks, moulded pedestal feet so it stands upright, and a web strap rather than a latch carrying the closing load.

At 6.54 pounds it is the lighter end of the family, which matters more than it sounds. A four-piece kit in hard cases is four of these decisions multiplied, and a pound each way is the difference between one trip and two.

Specifications

Specifications
AttributeValue
Hardware
TypeRoto-moulded hard tom case1
Weight6.54 lb1
model
Model number1SKB-D10121
case
Interior depth12 in1
Interior diameter14.5 in1
Exterior16 × 15.75 × 13.5 in1
SurfacePatented Roto-X pattern, for stacking1
FeetMoulded pedestal feet, for upright storage1
ClosureHeavy-duty web strap with high-tension slide-release buckle1
HandlesSure-grip, with a 90° stop1
InteriorPadded1
WarrantyLife of the case, to the original owner1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    10 x 12 Tom Case

    SKB Corporation · accessed 2026-09-24