
Roc-N-Soc · Tower
Roc-N-Soc Tower
The Roc-N-Soc Tower is a tall fixed-height stool built for propping and leaning rather than full seating — 29, 26 or 20 inches depending on model. It uses two-ring construction for stability, the seat swivels, and it takes any of the company's four seat shapes.
Propping, leaning, demonstrating
Roc-N-Soc names three uses for this stool and none of them is sitting down to play a kit: propping, leaning, and in-store demonstration.
That is the useful thing to know about it. At 29 inches the seat is higher than a drum throne needs to be, and the position it produces is half-standing — weight partly on the seat, partly on the legs, the player upright rather than seated.
Who needs that: a percussionist working standing instruments who wants somewhere to rest between pieces; a singing drummer who needs a higher eye line; a player on a small stage working a cajon or a cocktail kit; and, as the company says, anyone spending a day on a shop floor.
Two-ring construction
A tall stool on a small base is a tipping problem, and the answer here is structural rather than massive.
Two rings connect the legs at different heights instead of one. The lower ring is where the feet go; the upper one triangulates the legs partway up their length, which stops them splaying under a load applied high above the base.
It is the arrangement bar stools and workshop stools settled on for the same reason, and it is what allows a 29-inch seat that does not need a heavy foot to stay put.
Swivel as standard
Every Tower swivels, and on a tall stool that is less controversial than it is on a drum throne.
A leaning position is one you get in and out of frequently, and a seat that turns to meet you is easier to mount than one that does not. There is also less of the twisting-under-load problem that makes a free-spinning throne divisive, because a player at this height is not driving two pedals from the seat.
Three heights, no backrest
Tower at 29 inches, Tower Short at 26, Tower Sub Short at 20.
The 20-inch model overlaps with ordinary throne territory, and it is worth noting that it is still a fixed-height stool with no adjustment — this is a family defined by not adjusting, where the rest of the Roc-N-Soc catalogue is defined by how it adjusts.
Backrests are available across the Manual Spindle and Lunar ranges and are not offered here, which follows from the intended use: you cannot lean back from a leaning position.
The same seats
The Original saddle, the Hugger, the Round and the Square all fit, in the full colour range.
That is the through-line of the whole Roc-N-Soc catalogue: four seat shapes, and a choice of what goes under them. The Tower is the option where what goes under them is height and nothing else.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec