
Kelly SHU · SHU
Kelly SHU Pro
The SHU Pro is Kelly SHU's machined aluminium microphone cradle, suspended inside a kick drum or a tom of 14 inches or more on a rubber support cord hooked to the tension rods. It is cut from #303 aluminium, anodised black and laser-etched, weighs 19 ounces, fits more than twenty-four named microphones, and carries a limited lifetime warranty.
No drilling
The single most important thing about the design is what it does not do to the drum.
Internal mic mounts that bolt through the shell exist, and they work, and they put a hole in an instrument. The SHU Pro hangs on a rubber support cord that hooks to the tension rods the drum already has, with loops and grommets giving ten points of adjustment to position the cradle where the mic needs to be.
A bass drum shell is a resonating body and a resold object. A mount that comes off leaving nothing behind is worth a great deal on both counts, and it is why this approach won over the alternatives.
Why the rubber matters
The cord is not there only to hold the cradle up. It is there to decouple it.
A microphone rigidly attached to a drum shell hears two things: the air inside the drum, which is what you want, and every vibration travelling through the shell itself, which arrives as a thump on the diaphragm with no relation to the sound in the room.
Suspending the cradle on rubber means the shell’s mechanical vibration is largely absorbed before it reaches the mic. The same principle runs every studio shock mount; this one just does it inside a drum that is about to be loaded into a van.
Machined aluminium, and what it costs
#303 aluminium, machined rather than cast or pressed, anodised black, laser-etched.
303 is a free-machining grade — alloyed to cut cleanly, which is what you want for a part with this many slots, holes and threaded features. Anodising hardens the surface and stops it marking the drum’s interior; laser etching survives being handled in the dark.
Nineteen ounces is not nothing to hang inside a bass drum, and it is the honest cost of a machined part. The composite version of the same product exists for players who would rather not carry it.
Twenty-four microphones
The compatibility list is the specification most people actually check, and it is long: Shure, Audix, Audio-Technica, Electro-Voice, Sennheiser, AKG, Beyerdynamic, Heil, Lewitt.
A universal post with standard threads and an oversized jam nut is how one cradle covers that spread — the mic’s own clip screws to the post, so anything with a standard mic clip fits, and the named list is really a list of mics whose clips have been checked to clear the cradle.
That is the difference between a product designed around one microphone and one designed around the problem.
Specifications
| Attribute | Value |
|---|---|
| Hardware | |
| Type | Internal shock-mount microphone cradle1 |
| Material | Machined #303 high-grade aluminium, black anodised with laser-etched markings1 |
| Weight | 19 oz1 |
| Dimensions | 10 × 8 × 4 in1 |
| Fits drums | Kick drums, and toms of 14 in diameter or more1 |
| Microphone compatibility | More than 24 models, including Shure Beta 52A and Beta 56A, Audio-Technica ATM250 and AE2500, Audix D6 and D4, Electro-Voice RE20 and ND68, Sennheiser e904 and e602 II1 |
| Mounting | 3.5 ft solid rubber support cord with 20 hooks, to the drum's existing tension rods; no drilling1 |
| Included | Cradle, support cord and hooks, universal mic post with standard threads, oversized jam nut, 10 adjustment holes with grommets, 10 interior loops1 |
| Warranty | Limited lifetime1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec