
Humes & Berg · Galaxy
Humes & Berg Galaxy Cymbal Bag
The Humes & Berg Galaxy cymbal bag is a nylon-shelled bag with half an inch of interior padding, a double-stitched zipper on steel teeth and oversized pulls. It comes in 22 and 24 inch, with or without dividers, and a 22-inch version with dividers and Tilt-N-Pull wheels.
Why cymbals need dividers and drums do not
A drum in a bag is one object. A cymbal bag holds six or eight metal discs stacked face to face, and every one of them is harder than the next one’s surface.
What happens without dividers is not dramatic and it is cumulative: the bell of one cymbal rests on the bow of another, the bag is carried, and the two grind together over a hundred journeys. The result is a ring of wear where the cymbals touched, and on a lathed cymbal that means the tonal grooves are polished away in a band.
Fabric dividers keep the faces apart. They are the single most consequential feature on a cymbal bag and the one most often omitted, which is why Humes & Berg sells the same bag both ways.
Half an inch of padding
Cymbals are not fragile in the way drums are — you will not put a hole in one by dropping the bag.
What padding protects is the edge. A cymbal’s edge is thin and it is the part that takes the impact when a bag is set down hard, and an edge that has been dented or slightly folded is a cymbal with a crack waiting to start from that point.
Half an inch is a reasonable figure for a soft bag: enough to absorb a normal knock, not so much that the bag becomes a case.
Steel zipper teeth
The single most common failure on any instrument bag, and a cymbal bag is the worst case for it: the load is heavy, dense, and concentrated along the bottom of the zip when the bag is carried.
Moulded plastic teeth spread under that load and the slider stops mating them. Steel teeth do not deform, and a double-stitched tape keeps the teeth attached to the bag under the same pull.
The extra-large pulls are a stage detail — Humes & Berg’s own justification is finding and gripping them in the dark, which is where a cymbal bag is usually opened.
Tilt-N-Pull
One 22-inch version has wheels and a handle.
Eight cymbals is twenty to thirty pounds hanging off one shoulder, and it is the load most likely to be carried furthest, because the cymbal bag is what a drummer takes when the kit is already provided. Putting it on wheels solves a problem specific to that: the bag that travels alone.
Specifications
| Attribute | Value |
|---|---|
| Hardware | |
| Type | Cymbal bag1 |
| Outer material | Tough nylon1 |
| Padding | Half-inch interior padding1 |
| Zipper | Double stitched, steel teeth, extra-large pulls1 |
| Carry | Shoulder strap on selected models1 |
| Sizes | 22 in, 22 in with dividers, 22 in with dividers and Tilt-N-Pull, 24 in, 24 in with dividers1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec