
Gibraltar · Chrome Series II
Gibraltar Chrome Series II Stealth Rack
The Gibraltar Chrome Series II Stealth Rack is a side-rack system with no front crossbar, built around a low-profile curved bar 18.5 inches high. It carries up to three rack toms and an expanded cymbal array, breaks into three bars and two legs, and its legs take multi-diameter adapters for tom, cymbal and electronic mounts.
A rack without a front bar
The defining feature of a drum rack for forty years has been the bar across the front. It is where the toms hang and it is also a wall between the drummer and the room.
A side-rack design puts the structure to your left and right instead, and leaves the space in front of you empty. Toms mount from the sides; cymbals come in over the top on arms from the same side sections.
What you get back is sight lines — to the audience, to the rest of the band, and from the audience to you. For a drummer who is also singing, cueing, or simply being seen, that is not a cosmetic point.
Eighteen and a half inches
The number that makes it work. At that height the curved bar sits below the level of the drums’ hoops on a normally set-up kit, so it disappears behind the shells rather than standing above them.
Low also means short legs, which means less leverage on the joints and a frame that resists being pushed around without needing to be heavy.
Multi-diameter leg adapters
Drum hardware is not standardised. Tom arms come in 12.7 mm and 9.5 mm; cymbal arms in half-inch and metric near-equivalents; electronic mounts in their own sizes again.
Adapters built into the legs mean the rack accepts what you already own rather than requiring the maker’s own arms. For a player moving to a rack from a collection of stands assembled over ten years, that is the difference between a change of frame and a change of everything.
It also opens the hybrid case directly: an electronic pad on the same leg as an acoustic tom, on a mount that was designed for it.
Pairing with legless stands
Gibraltar’s own suggestion is to run this alongside a legless snare stand and a legless hi-hat — both of which clamp to the rack rather than standing on the floor.
Follow that through and the floor under the kit is empty except for the two rack legs, the bass drum and the throne. That is the whole argument for racks, arrived at from the opposite direction to the front-bar design: not a frame that holds everything up, but a frame that gets everything off the ground.
Specifications
| Attribute | Value |
|---|---|
| Hardware | |
| Type | Drum rack — dual side rack, no front bar1 |
| Bar height | 18.5 in1 |
| Capacity | Compact kits to three rack toms with expanded cymbal arrays1 |
| Leg adapters | Multi-diameter — tom arms, cymbal arms and electronic drum mounts1 |
| Memory locks | Included1 |
| Breakdown | Three bars and two legs, or carried assembled1 |
| System compatibility | Gibraltar Stealth VMS, or standalone1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec