
DW · 5000 Series
DW 5100 Round Top Throne
The DW 5100 is a drum throne with a 13-inch round seat three inches thick, carried on a corkscrew height adjustment with an oversized locking nut and a double-braced steel tripod. Height runs from 21 to 28 inches. The seat mounts on a cast under-seat vise.
The corkscrew
The seat sits on a coarse external thread and you set the height by spinning the top. It is the oldest drum-throne mechanism there is and it survives because nothing about it can slip: the load sits on the thread, not on a friction clamp, so the height you set is the height you keep.
The oversized locking nut underneath is the second half of the idea. Spinning the top to a height leaves it free to spin back; running the nut up against it locks the thread out. Set, lock, forget.
What it costs is speed. Changing height means unloading the seat and turning it, which is slower than a lever and much slower than a gas cylinder. That is the choice DW’s line offers rather than resolves — the 9100AL is the fast one, this is the one that never moves.
Thirteen inches, three inches thick
Seat area and foam depth are the two numbers that decide how a throne feels over four hours, and both are conservative here compared with the 14-inch 9000 tops.
Thirteen inches is a normal round seat: enough to shift on, small enough that a leg swings clear of it. Three inches of foam over a rigid base is a lot of travel before you reach the board, and vinyl over the top is the covering that survives being loaded in and out of a van wet.
Where the weight is
A double-braced steel tripod on 1⅛-inch legs is the heavy option — the second brace triangulates each leg so the base resists being knocked sideways, which is what actually moves a throne during a set.
Lightweight thrones exist and are easier to carry; they also walk on a raked stage under a player who works the bass drum hard. The 5100 spends its weight on staying put.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec