Ahead · Armor Cases
Ahead Armor AA9026-2 Saddle Top Throne Case
The Ahead Armor AA9026-2 is a throne case sized for larger thrones and for thrones with a backrest, with a padded fleece divider separating seat, base and backrest. It is built in 600-denier weather-resistant polyester over two layers of high-impact foam with a Sherpa fleece lining, and carries a backpack strap.
The case nobody buys until they need it
Drums get cases. Cymbals get a bag. Hardware goes in a hardware bag. The throne, being the wrong shape for all of them, generally travels loose in the boot of a car with a floor tom on top of it.
What that does to a throne is predictable: the seat covering scuffs at the edges, the base gets bent out of true, and the height adjustment picks up grit. A throne is also the piece of a kit most likely to be sat on by someone else and returned in a different condition.
This is a case for one, sized specifically for the larger thrones and the ones with a backrest, which are exactly the models that fit nothing else.
The divider, which is also the strap
A throne in a case is two or three separate objects — a seat, a base, and sometimes a backrest — and if they travel loose together, the metal marks the upholstery.
The divider here is padded and fleece-lined, keeping the seat away from the base. Ahead lists it as “back pack strap / divider”, so the same component does both jobs: inside the case it separates the parts, and outside it carries the whole thing on your back.
That is a good piece of design thinking, and the practical result is a throne you can carry with your hands full of something else.
DX-Core
Ahead’s name for its padding stack: two layers of high-impact foam with a premium Sherpa fleece lining against the contents.
The two materials are doing different jobs. High-impact foam absorbs a drop — it is the layer that matters when the case goes off a tailgate. Fleece is a friction and abrasion layer, protecting a finish from the rubbing that happens on every journey rather than from a single impact.
Six hundred denier polyester outside is the standard weight for instrument bags, chosen here in a weather-resistant grade, which on a case that lives on a pavement between the van and the door is the difference that shows.
DynaZip
Ahead’s zipper arrangement runs along the diameter of a case and down both sides of a cut-out, producing a much larger opening than a single zip across the top.
On a drum case that is about getting a drum out without fighting it. On a throne case it is about getting three awkward shapes in and out — and a case you can load quickly is a case that gets used, which is the only property that actually protects anything.
Specifications
| Attribute | Value |
|---|---|
| Hardware | |
| Type | Drum throne case1 |
| Holds | Saddle top, backrest and stand1 |
| Outer material | 600-denier polyester, weather resistant1 |
| Padding and lining | DX-Core — two layers of high-impact foam with premium Sherpa fleece lining1 |
| Divider | Padded fleece, separating throne from base and backrest1 |
| Zipper | DynaZip1 |
| Carry | Backpack strap, doubling as the divider1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec