
Lefima · Professional Line
Lefima Professional Line Tunable Tambourine
This is a tambourine with titanium tension screws hidden inside the frame and a calf head roughened at the edge for thumb rolls. The jingles come in six hand-hammered materials, each catalogued with its own timbre and dynamic range, and they can be mixed or arranged in zigzag to change the sound.
Catalogue record. This entry carries specifications and their sources, and no written assessment — nobody has written one yet. Everything in the table below is sourced and marked the same way as anywhere else on the site. For entries that explain the design rather than only record it, see the anatomy pages or any model marked as a full entry.
Specifications
| Attribute | Value |
|---|---|
| Origin | |
| Made in | Germany1 |
| perc | |
| Type | Tunable tambourine1 |
| Frame | Lightweight waterproof bonded plywood, with an Ergo grip on all double-row models1 |
| Tuning mechanism | Titanium tension screws built into the frame, nearly invisible; tuning key stored in an integrated holster1 |
| Head | Thin evenly tanned Kalfo calf, roughened at the edge for thumb rolls; fully roughened on request1 |
| Jingle materials | Six hand-hammered options — bronze (rich, deep, warm, mf–ff), brass (bright, soft, pp–ff), German silver I (bright, hard, pp–f), German silver II (very bright, accented, p–f), special alloy I (bright, soft, lively, pp–f), special alloy II (very bright, soft, lively, pp–fff)1 |
| Models | 10 in with 9 or 18 jingles, 11 in with 11 or 22, 13 in with 13 or 26 — single or double row1 |
| model | |
| Model numbers | KT-009-S010-100, KT-018-S010-200, KT-011-S011-100, KT-022-S011-200, KT-013-S013-100, KT-026-S013-2001 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec