Yamaha · DTX10
Yamaha DTX10 Series
The flagship DTX: birch shells built and finished in Yamaha's acoustic drum factories, carrying either TCS silicone heads (DTX10K-X) or mesh heads (DTX10K-M), with the DTX-PROX module, three-zone cymbal pads up to 17 inches, and a 12-inch mesh kick pad on both versions.
The shells come from the acoustic factory
The DTX10’s shells are birch, made and painted in the same Yamaha plants that build the company’s acoustic drums, and the badges, lugs and hoops are standard acoustic parts.
That is unusual and it is the line’s central argument. Most electronic kits are made by companies whose business is electronics; Yamaha has been building drums since 1967, and the DTX10 is what happens when the shell is treated as a drum rather than as a housing for a sensor.
The practical consequences are hoops at acoustic height, lugs a drum key fits, and a kit that can be re-wrapped, re-finished and repaired using parts from the acoustic catalogue.
Choose your head material at purchase
The DTX10 is sold as two kits that differ in one specification: the DTX10K-X has TCS heads and the DTX10K-M has mesh.
TCS — Textured Cellular Silicone — is Yamaha’s own material, a silicone head with an internal cell structure tuned for hardness and rebound and a treated surface that stops the stick sliding. It feels closer to a coated head than mesh does, and it is the quietest of the three common surfaces.
Mesh is a tensioned woven head. It rebounds more, it can be tuned with a drum key, and it is the surface most players coming from acoustic drums reach for first.
Neither is the better material. They are different preferences, and Yamaha’s decision to sell the same kit both ways is the most honest way a maker can handle that. The kick pad is mesh on both versions.
Cymbals in three zones, up to 17 inches
Every cymbal pad on the kit is three-zone — edge, bow and bell as separate sounds — and the ride is a 17-inch PCY175, which is a real ride diameter rather than a scaled-down one. The crashes are 13 and 15 inches, and the RHH135 hi-hat goes on an HS740A stand.
Three zones on a crash matters less than on a ride, but it is what makes a choke and an edge swell distinguishable from a bow hit.
The module and its outputs
The DTX-PROX runs the kit: 70 preset kits, 200 user slots, 733 voices, and KIT MODIFIER knobs for ambience, compression and effects. Four stereo individual outputs on top of the main pair mean the kit can arrive at a desk in eight channels.
Sample import runs to 1,000 WAV files and nearly 51 minutes of mono audio, which is enough to load a show’s worth of backing material into the module itself.
Specifications
| Attribute | Value |
|---|---|
| ekit | |
| Module | DTX-PROX — 70 preset and 200 user kits, 733 voices, 256-note polyphony2 |
| Pad surface | TCS silicone on the DTX10K-X, mesh on the DTX10K-M; the kick pad is mesh on both2Yamaha publishes the two head materials as the difference between the K-X and K-M versions. It does not state a surface material for the RHH and PCY cymbal pads. |
| Shells | Real birch, built and painted in Yamaha's acoustic drum factories, with standard acoustic badges, lugs and hoops1 |
| Snare pad | XP125SD, 12 in, two zone — TCS on the K-X, mesh on the K-M, on an SS662 snare stand2 |
| Tom pads | XP105T 10 in rack toms and an XP125T 12 in floor tom, all two zone2 |
| Kick | KP128, 12 in mesh pad with a multi-layer cushion2 |
| Cymbals | RHH135 13 in two-zone hi-hat on an HS740A stand, PCY135 13 in and PCY155 15 in crashes, PCY175 17 in ride; all cymbal pads are three zone2 |
| Outputs | Stereo L/MONO and R, four stereo individual outputs (1/2, 3/4, 5/6, 7/8), two headphone jacks2 |
| Sample import | Up to 1,000 WAV files, 50 min 40 s mono or 25 min 20 s stereo at 44.1 kHz 16-bit2 |
| Trigger inputs | Ten trigger jacks plus hi-hat control, up to fourteen pads with Y-cables2 |
| Footprint | 1,100 mm by 1,600 mm average; 46.77 kg for the K-X and 42.1 kg for the K-M2 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec