Yamaha · DTX-PRO
Yamaha DTX-PRO
The module at the centre of Yamaha's DTX6 and DTX8 kits, sold separately as well: 40 preset and 200 user kits across 712 voices, KIT MODIFIER knobs for ambience, compression and effect, and up to fourteen pads on ten trigger jacks.
Where it sits against the PROX
The DTX-PRO and the DTX-PROX share an approach and differ in three measurable ways: outputs, sample memory and kit count.
The PROX has four stereo individual outputs; this has a stereo pair. The PROX loads nearly 51 minutes of mono samples; this loads 760 seconds, a little under thirteen. The PROX holds 70 preset kits and 733 voices; this holds 40 and 712.
Everything else a player touches day to day — the KIT MODIFIER knobs, the sampled library, the room-ambience recordings, the training tools, fourteen pads on ten jacks — is common to both. For a drummer who monitors on headphones and takes a stereo feed to a desk, that list of differences may contain nothing they would ever use.
Three knobs that do most of the work
AMBIENCE, COMPRESSION and EFFECT are physical knobs, and between them they cover most of what a drummer wants to change about a kit sound: how much room is around it, how tightly it is controlled, and what is on top.
That is a deliberately small set of controls. Yamaha’s position is that a module offering three hundred parameters gets edited once and a module offering three gets edited constantly, and on a practice kit or a rehearsal kit the second one is more useful.
Ten jacks, fourteen pads
The trigger jacks are documented by what each can do: rim-switch inputs on 1, 14 and 8 to 11, dual trigger pairs on 2/3, 4/5, 6/7 and 12/13. Y-cables take the total to fourteen pads, which is a large kit — six drums, four cymbals and change.
Knowing which jack supports what is the difference between planning an expansion and discovering a limit after buying the pad.
Bought on its own
This is the module inside the DTX6 and DTX8 kits, and buying it separately is a common way to modernise an older DTX rack or to put a Yamaha brain behind another maker’s pads. It drives the XP, PCY, RHH and KP pad ranges and the DT-50 acoustic triggers.
Specifications
| Attribute | Value |
|---|---|
| ekit | |
| Module | DTX-PRO — 40 preset and 200 user kits, 712 voices2 |
| Sound engine | Real sampled drums with the ambience of the room they were recorded in, fine-tuned to follow the player's dynamics1 |
| Editing depth | KIT MODIFIER knobs for ambience, compression and effect1 |
| Trigger inputs | Ten trigger jacks — rim-switch pairs on 1, 14 and 8 to 11, dual trigger on 2/3, 4/5, 6/7 and 12/13 — with up to fourteen pads using Y-cables2 |
| Outputs | Stereo L/MONO and R, one headphone jack, one stereo mini aux input2 |
| Sample import | Up to 1,000 WAV files, 760 seconds mono or 380 seconds stereo at 44.1 kHz 16-bit2 |
| Connectivity | USB to host and USB to device, MIDI out2 |
| Practice features | Ten training types, 30 click sets, 37 preset songs, and a recorder — 90 seconds internally or 90 minutes per file to a USB drive2 |
| Display | Full-dot LCD, 128 x 642 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec