
GEWA · G3
GEWA G3 Club
A shell kit on GEWA's entry module: a Black Sparkle set of flat shells — 10x5, 12x5 and 14x5 toms, a 14x5 snare and an 18x14 kick — with three-zone NEO cymbal pads and a GEWA electronics stand pack. All GEWA pads use two-layer true-rebound mesh heads.
Flat shells, which is a third option
Electronic kits usually come two ways: pads on a rack, or full-depth acoustic shells. GEWA’s Club configuration is a third — real shells with real hoops and real hardware mounts, but flat. Five inches deep on every tom, 14 inches on the kick.
What that buys is the look and the mounting of a shell kit at close to the footprint of a rack kit. The drums go on stands and mounts the way drums do, the hoops are at drum height so rim work lands correctly, and the kit reads as drums from the audience — without three toms each taking up a foot of depth.
Ten by five, twelve by five, fourteen by five: those are shallow, and on an electronic kit the depth was never doing acoustic work anyway.
Black Sparkle, and shells that go on stands
The set is finished in Black Sparkle, and it ships with GEWA’s electronics stand pack including hi-hat and snare stands rather than a four-post rack. The 18 by 14 kick stands on the floor and takes a normal pedal.
Sold with the G3, the entry module, this is a kit that looks considerably more expensive than its brain is — which is exactly the trade GEWA’s grid is built to allow. The same shells are available with the G5 or G9 for anyone who wants the other half upgraded.
Two-layer mesh everywhere
Every GEWA drum pad uses a two-layer true-rebound mesh head, specified for durability as much as feel. Two layers give a rebound closer to a tuned acoustic head than a single layer does, and make noticeably less noise in the room.
The consistency across GEWA’s catalogue matters when the kit is expanded: a pad bought two years later has the same surface as the ones bought today.
Three-zone cymbals with no dead sector
The NEO cymbal pads trigger bell, bow and edge separately, have a full 360-degree playing surface and choke at the edge. Two 16-inch crashes, an 18-inch ride and a 14-inch hi-hat.
A 360-degree surface removes the habit most electronic drummers develop of aiming away from the mount, and the edge choke is what makes a crash end when the hand arrives rather than when the sample does.
Specifications
| Attribute | Value |
|---|---|
| Origin | |
| Made in | Germany1GEWA states that its digital drums are developed by European drummers and engineers and manufactured in Germany, as a statement about the range rather than about this kit specifically. |
| ekit | |
| Module | G31 |
| Pad surface | Two-layer true-rebound mesh heads on the drums1GEWA states two-layer true-rebound mesh across its whole pad range. It does not publish a surface material for the NEO cymbal pads. |
| Shells | Flat shells in a Black Sparkle finish — 10 x 5, 12 x 5 and 14 x 5 in toms, 14 x 5 in snare, 18 x 14 in kick1 |
| Kit configuration | G3 module, Black Sparkle flat-shell set, two 16 in crash pads, 18 in ride pad and 14 in hi-hat pad, GEWA electronics stand pack with hi-hat and snare stands1 |
| Cymbals | NEO pads, all three zone — bell, bow and edge — with a 360-degree playing surface and edge choke1 |
| Tom pads | 10 x 5, 12 x 5 and 14 x 5 in, all two zone1 |
| Sound engine | The same library as the flagship G9 — over 10,000 samples with real room microphones recorded per instrument2 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec