
EFNOTE · PRO
EFNOTE PRO 500X
The compact EFNOTE PRO: the same EFD-PRO module and twelve balanced XLR outputs as the 703X, on a smaller shell set — a 16x12 kick, a 14x5.5 snare with a side-rim zone, a 10x7 tom and a 13x13 floor tom, all birch with double-layered mesh heads.
The same back panel, a smaller front
The 500X and the 703X are the same instrument electrically. Both use the EFD-PRO module, both send twelve balanced XLR channels to a desk, both address seven shells and eight cymbals, and both carry the same library.
What is different is the shell set. Sixteen by twelve on the kick instead of 20 by 15; one 13 by 13 floor tom instead of two at 13 and 15. A 14 by 5.5 snare and a 10 by 7 rack tom are common to both.
That makes the 500X the choice for a small stage, a church platform with a shallow riser, or a studio with a tight live room — with nothing given up in what reaches the mixing desk.
Sixteen inches of kick
A 16 by 12 bass drum is a bop-kit size, and on an electronic instrument the diameter is doing ergonomic rather than acoustic work: it sets pedal height and beater angle, and it decides how much of the drummer’s front the kit occupies.
Four inches smaller than the 703X’s is noticeable in a van and on a small platform, and it changes nothing about the sound, because the sound is a recording of a much bigger drum if that is what the kit is set to.
Individually wired
Every pad on a PRO kit runs on its own cable to the module rather than through a shared loom. That is slower to set up and much better to maintain: a failed cable takes out one drum instead of six, and a pad can be moved, swapped or borrowed without unpicking a harness.
For a kit that is expected to be assembled and torn down weekly, this is the difference between a quick fix at soundcheck and a missing tom for a show.
What the twelve channels are for
Assignable as stereo or mono sends — kick, snare, toms, cymbals, click, and an external sampling pad are EFNOTE’s own examples. Each has a high-pass filter and 2-band EQ, buses 1 to 6 have compressors, and every output has a ground lift.
A ground lift on a drum output is a small detail with a specific history: a hum loop between a stage rig and a house desk is one of the more common and most embarrassing live faults, and this is the switch that fixes it.
Specifications
| Attribute | Value |
|---|---|
| ekit | |
| Module | EFD-PRO — 23 editable preset kits and 100 user kits, full-colour capacitive touchscreen, two multi-function knobs and a value knob1 |
| Pad surface | Double-layered mesh on the drums1EFNOTE states two-ply mesh heads on birch shells for the whole PRO drum lineup. It does not publish a surface material for the EFD-C and EFD-H cymbal pads on this page. |
| Shells | Birch, in a Black Oak-ish finish, with a wood hoop on the kick1 |
| Kit configuration | EFD-PRO module, EFD-K1612 16 x 12 in kick, EFD-S1455 14 x 5.5 in snare, EFD-T1070 10 x 7 in tom, EFD-T1313 13 x 13 in floor tom, EFD-H14 14 in hi-hat1 |
| Kick | EFD-K1612, 16 x 12 in, double-layered mesh with a beater patch and a wood hoop1 |
| Outputs | Twelve balanced XLR channels, assignable as stereo or mono sends, each with a high-pass filter and 2-band EQ, individual compressors on buses 1 to 6, and ground-lift switches1 |
| Connectivity | Twelve-channel multitrack USB audio and sixteen-channel USB MIDI running simultaneously1 |
| Trigger inputs | Supports seven shells and eight cymbals, all individually wired; seven three-zone inputs for snare, ride, hi-hat and four crashes1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec