
Carlsbro · CSD
Carlsbro CSD45M
A nine-piece mesh kit with a legless open-close hi-hat stand attached to the frame: two 10-inch and two 8-inch dual-zone mesh pads, an 8-inch mesh bass pad, three 10-inch cymbals and a 12-inch dual-zone ride, on the Commander 25 module with two headphone outputs.
A hi-hat stand with no legs
The CSD45M’s distinguishing feature is its hi-hat: an open/close stand attached to the frame with no legs of its own.
Legs are what get in the way. A conventional hi-hat stand plants a tripod directly where a double pedal’s left board wants to be, and the usual compromises are to splay the legs awkwardly, to push the hi-hat out of reach, or to give up on the second pedal. Hanging the stand off the rack removes the tripod entirely.
What is kept is the part that matters: the hi-hat opens and closes on hardware rather than being a fixed pad with a switch beneath it, so the foot does the motion it will do on any acoustic kit.
Mesh drums, rubber cymbals
Every drum pad is mesh — two at 10 inches, two at 8, plus an 8-inch mesh bass pad — with dual-zone triggering on the rim and the main surface. The rims are low profile, which Carlsbro states is both to improve accuracy and to cut the noise of unintended rim shots.
The cymbals use a soft-touch rubber described as noise-reducing. Rubber on cymbal pads is the ordinary choice and a reasonable one: a cymbal is struck across its surface rather than tuned, and rubber is durable and quiet.
The 12-inch ride is dual-zone, splitting bow and bell, and both 10-inch crashes choke.
A frame that reverses
The rack is fully adjustable, preassembled, and made to be reconfigured with wing nuts and a single included drum key — no tools.
Carlsbro puts particular weight on it reversing for left-handed players. That is not a small thing. Left-handed drummers are routinely told to learn right-handed because the kit will not cooperate, and a frame designed to mirror is a real answer rather than a claim.
The same adjustability is what lets the kit fit a child and then keep fitting them.
Two headphone outputs
The Commander 25 has two headphone outputs, which Carlsbro is explicit about designing for teaching: a tutor can plug in and listen without stopping the student, or the two can share what is being played.
That is the clearest statement of who this kit is for. Beyond the module’s 320 voices, 22 preset kits and 20 backing tracks, the expansion options — a fourth tom, a second bass pad, a double-kick control — mean a kit bought for a drum school can grow with the room rather than being replaced.
Specifications
| Attribute | Value |
|---|---|
| ekit | |
| Module | Commander 25 — 320 voices, 22 preset and 10 user kits, 20 backing tracks, three recording save slots1 |
| Pad surface | Mesh heads on the drum pads; noise-reducing soft-touch rubber on the cymbal pads1 |
| Kit components | Commander 25 module, two 10 in and two 8 in dual-zone mesh pads, 8 in bass pad and kick pedal, 10 in hi-hat, two 10 in crashes with choke, 12 in dual-zone ride with choke, legless open/close hi-hat stand, four-legged adjustable rack, wiring loom, sticks and drum key1 |
| Hi-hat | 10 in pad on a legless open/close hi-hat stand attached to the frame, with a small footprint that leaves room for a double pedal1 |
| Cymbals | Two 10 in crashes with choke and a 12 in dual-zone ride with choke, the ride splitting bow and bell1 |
| Pad design | Dual-zone rim and main-pad triggers under low-profile rims, with sensing designed to remove dead spots across the playing surface1 |
| Outputs | Two headphone outputs, stereo output, aux input1 |
| Connectivity | USB MIDI in and out, USB audio1 |
| Expansion | A noise-reducing bass drum control pedal, a fourth tom pad at 8 or 10 in, and a second bass pad or control for double kick1 |
| Rack | Fully adjustable four-legged frame, preassembled, reversible for left-handed players, adjusted with wing nuts and one drum key1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec