
Remo · S-Series
Remo S-Series Skyndeep
The Remo S-Series Skyndeep is the small-bongo and doumbek Skyndeep head on a thin open-channel hoop. The graphic is pigment infused into the polyester surface rather than printed on it, which is what makes it weather-resistant, and the tone is warm with increased volume and projection.
Catalogue record. This entry carries specifications and their sources, and no written assessment — nobody has written one yet. Everything in the table below is sourced and marked the same way as anywhere else on the site. For entries that explain the design rather than only record it, see the anatomy pages or any model marked as a full entry.
Specifications
| Attribute | Value |
|---|---|
| Heads | |
| Plies | Not published1*Remo publishes no ply count for this head. |
| Film thickness | Not published1*Remo publishes no film gauge for this head. |
| Coating | Skyndeep graphic — colour infused into the film1 |
| Position | Batter1*Remo publishes no batter or resonant position for its world-percussion heads. A conga, bongo, djembe or doumbek head is the drum's only head, so it is the batter. |
| Hoop | Thin, open-channel hoop1 |
| Technology | Skyndeep — pigment infused into a polyester surface1 |
| Intended use | Bongos and doumbek1 |
| Character | Warm tones with increased sound, volume and projection1 |
| Fit | Small-model bongos — 6.75-inch macho and 8-inch hembra1 |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec