Drum Atlas
Menu

Code Drumheads · TRS

Code TRS

  • Drumhead
  • pro
  • current

TRS is a Code twin-ply head built from 7.5 mil film with a white surface dot. The dot sits on the playing side, where it adds mass and durability at the strike point and is visible as well as structural, on a two-ply head that is already short and controlled.

Updated 2026-09-24Sources

What Code publishes, and what it does not

Code gives the TRS as twin-ply 7.5 mils with a white surface dot. That leaves one thing genuinely ambiguous: whether 7.5 mil is the thickness of each ply or of the pair.

It matters. Elsewhere in the same range Code is explicit when it means the former — the Generator is listed as 7.5 mils x 2, and Sterling as 2 x 7.5 mils. The TRS entry carries no multiplier, and without one there is no honest way to put a number on the total film. So this record does not.

The dot on top

What is not ambiguous is the reinforcement. The dot is on the playing surface, which puts it between the stick and the film rather than under it.

Surface mounting has two consequences. The player feels it: a firmer, slightly deader circle in the middle of the head. And it protects the head from the top down, which is the direction wear actually comes from. On a two-ply head that is already focused and short, the dot narrows the attack further.

A white dot on a clear two-ply is also a look, and on a kit under lights it is a clearer visual marker than an underside dot could ever be.

Specifications

Specifications
AttributeValue
Heads
Plies21
Film thicknessNot published1*Code gives the TRS as twin-ply 7.5 mils without stating whether that figure is per ply or the total, so no film thickness is claimed here.
CoatingClear1Code describes the TRS as twin-ply with a white surface dot rather than as a coated head.
PositionBatter2
ReinforcementWhite surface dot1
HoopGrip-Tight — double-knurled steel core in an aluminium or steel outer rim3
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    TRS

    Code Drum Heads · accessed 2026-09-24

  2. 2Tier 1 · Primarymanufacturer spec

    Code Drum Heads — products

    Code Drum Heads · accessed 2026-09-24

  3. 3Tier 1 · Primarymanufacturer spec

    Grip-Tight rim technology

    Code Drum Heads · accessed 2026-09-24