
Code Drumheads · RR
Code RR
RR is a single ply of 7.5 mil film with a clear damping ring. At 7.5 mil it is lighter than the 10 mil single plies most drums wear, so it responds to less energy and rings more freely — and the ring is there to keep that openness from turning into uncontrolled overtones.
Thin film with the ring built in
Two and a half mil below the standard single-ply weight is enough to change how a drum starts. Less mass means the head moves for less energy, which shows up as a more responsive drum at low volume and a longer decay at any volume.
Longer decay is the part that needs managing, and that is what the ring is for. A clear damping ring around the perimeter works on the edge modes — the high overtones that live near the hoop — and leaves the centre of the head free.
A different trade from a heavier head
The usual way to get a controlled drum is to add film: a second ply, or a thicker one. That shortens the note by making the head harder to move, which also costs you the light-stroke response.
RR goes the other way. It keeps a thin, sensitive head and adds damping only at the perimeter, so the drum stays easy to play quietly while the ring handles the ring. That makes it a natural pairing with smaller toms, which usually have too much high overtone and not enough body.
The rim
Like everything in the Code range, RR is built on the Grip-Tight rim rather than a glued hoop: a double-knurled steel core crimped into an aluminium or steel outer rim, depending on the range.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec
- 3Tier 1 · Primarymanufacturer spec