
Code Drumheads · Radar
Code Radar
Radar is Code’s twin-ply bass drum batter, fitted with an extra-wide damping ring. Two plies give the durability a beater demands and shorten the note; the wide ring reaches further into the playing area than a narrow one, so the drum is controlled from the head rather than from a pillow inside the shell.
How wide the ring is matters more than that there is one
Almost every modern bass drum batter has some damping bonded into it. What separates them is how far into the head it reaches.
A narrow ring sits close to the hoop and trims the edge overtones — the drum stays essentially open, with the halo taken off. An extra-wide ring, which is what Code specifies here, reaches well into the area the beater actually moves. That does not tidy the note, it shortens it, and it pushes the balance of what you hear downward.
The two-ply part
Code pairs the wide ring with two plies rather than one. On a bass drum the second ply is doing two jobs: surviving a beater landing in the same spot several hundred times a night, and stiffening the strike point so the attack arrives harder and sooner.
Together with the ring, that puts Radar firmly at the controlled end of the spectrum — the head for a player who wants a defined thud with a short tail and no blanket in the shell.
Code’s Blast is the single-ply kick with a clear damping ring, and the more open of the two. Radar is sold clear and coated, and both are built on the glue-free Grip-Tight rim.
Specifications
| Attribute | Value |
|---|---|
| Heads | |
| Plies | 21 |
| Coating | Clear, or coated1Code lists the Radar in clear and coated versions of the same twin-ply construction. |
| Position | Batter1Code lists the Radar as a kick head. |
| Dampening | Extra wide damping ring1 |
| Hoop | Grip-Tight — double-knurled steel core in an aluminium or steel outer rim3 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec
- 3Tier 1 · Primarymanufacturer spec