
Code Drumheads · Boomer
Code Boomer Snare
The Boomer Snare is a coated single ply of 14 mil film with a reverse donut dot underneath. Fourteen mil is unusually heavy for one ply — heavier than the 12 mil heads most makers treat as their thick single ply — and the donut shape puts the reinforcement in a ring rather than a solid disc.
Why a donut rather than a dot
A conventional centre dot is a solid disc. It adds mass over the whole strike area, which buys durability and focus and costs the head some of its freedom to move in the middle — the part that carries the fundamental.
A donut dot is the same reinforcement with the middle removed. The ring of extra film sits around the strike point rather than on top of it, so the centre of the head stays a single thickness and keeps moving. Code puts it on the underside here, which also leaves the coated surface unbroken for brushes.
Fourteen mil is a lot for one ply
For scale: a standard single-ply batter is 10 mil. The heavy single-ply options from most makers stop at 12. Code goes to 14, which is nearly the total film of a two-ply head carried in one layer.
That combination is the point of the design. A single thick ply and a two-ply head of similar weight do not behave alike — the two-ply has an interface between the layers that damps it, where one thick ply just resists. The Boomer stays more open and rings more freely than 14 mil of film in two layers would.
The Boomer Tom is the same family at 10 mil, clear, with a chrome surface donut dot on top.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec