Drum Atlas
Menu

Aquarian · Studio-X

Aquarian Studio-X Clear

  • Drumhead
  • pro
  • current

Studio-X Clear is a single ply of clear 10 mil Aquarian film with a lightweight muffle ring bonded around the perimeter on the underside. Aquarian designs it to remove unwanted high frequencies while keeping a warm, open and focused drum sound, and aims it at recording and close miking.

Updated 2026-09-24Sources

A ring instead of a second ply

There are two common ways to shorten a drum: add film, or add damping. They do not sound the same. A second ply changes how the head starts as well as how it stops — the attack gets harder and the sensitivity at low volume drops. A perimeter ring leaves the centre of the head alone and takes out the edge modes, which is where most of the ring lives.

Studio-X takes the second route. Underneath it is an ordinary clear 10 mil single ply, so it still responds to a light stroke the way a single ply does.

Why it is aimed at a microphone

Aquarian is specific that this is a recording and close-miking head. That is not marketing: a close mic sits inches from the head and hears the high perimeter overtones far more prominently than a listener in the room does. A drum that sounds fine acoustically can arrive at the desk ringing.

Trimming those frequencies at the head is cleaner than gating or EQing them out afterwards, and it leaves the low-end and the attack intact. The texture coated version of the same head is Studio-X Texture Coated; both are also offered with Aquarian’s Power Dot for durability.

Specifications

Specifications
AttributeValue
Heads
Plies11
Film thickness10 mil1
CoatingClear1
PositionBatter1
DampeningReverse Studio X ring on the underside1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Studio-X Clear

    Aquarian Drumheads · accessed 2026-09-24