Drum Atlas
Menu

Yamaha · Stage Custom

Yamaha Stage Custom Bop Kit

  • Drum kit
  • intermediate
  • current

The Stage Custom Bop Kit is a small-diameter three-piece in the same 6-ply, 7.2 mm birch shell as the rest of the Stage Custom range, with 45-degree R1.5 bearing edges, Absolute lugs and Y.E.S.S. tom mounting. Yamaha positions it for jazz, light session work and small-venue playing.

Updated 2026-09-24Sources

The same shell, smaller drums

Yamaha did not build a separate shell for the Bop Kit. It is 6-ply birch at 7.2 mm with a 45-degree R1.5 edge, exactly as on the 22 in Stage Custom kits, cut to an 18 in bass drum, a 12 x 8 in tom and a 14 x 13 in floor tom.

That is worth stating plainly because bop kits are often built thinner on the theory that a small drum needs a more responsive shell. Yamaha’s view is that the shell recipe is already right and the sizes are the variable, which keeps the Bop Kit tonally continuous with the rest of the range.

What an 18-inch bass drum gives up, and what it does not

An 18 x 15 in bass drum has roughly half the internal volume of a 22 x 18 in one, so its fundamental sits higher and it moves less air. What it gains is speed: less air to accelerate means a faster, more articulate response to the pedal, which is the entire reason jazz players have used this size since the 1950s.

At 15 in deep it is a properly proportioned drum rather than a shallow one, so it still has body behind the attack.

The 45-degree edge on a small drum

A sharp, small-radius edge minimises the head’s contact with the shell and lets it ring. On an 18 in bass drum and a 14 in floor tom — drums with limited air volume to work with — that extra openness is what keeps them from sounding choked when tuned low.

Where it fits

The obvious rival is the Gretsch Catalina Club Jazz, which reaches a similar footprint through 7-ply mahogany rather than birch and lands somewhere warmer and darker. The Yamaha is the more articulate and the more neutral of the two.

Specifications

Specifications
AttributeValue
Shell
Shell materialBirch1
Plies61
Shell thickness7.2 mm1
Bearing edge
Bearing edge45 degrees, R1.51
Hardware
LugsAbsolute lug with internal lug lock mechanism1
Tom mountY.E.S.S.1
Hoops1.5 mm triple flange steel on toms; wood on the bass drum1
Build
Sizes shownThe three-piece shell pack as listed by a retailer; Yamaha's own page does not publish the sizes2*Yamaha's specification page gives the shell and hardware but no size table for this pack.
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Stage Custom Bop Kit — Specs

    Yamaha Corporation of America · accessed 2026-09-24

  2. 2Tier 2 · Highretailer listing

    Yamaha Stage Custom Bop Kit RB

    Thomann · accessed 2026-09-24