Drum Atlas
Menu

Troyan Drums · Professional

Troyan Professional

  • Drum kit
  • custom
  • current

Troyan Professional is the shop's flagship kit, built on stave shells — solid wood staves glued edge to edge around the circumference rather than plies bent into a cylinder. Lugs are Troyan's own Pinlock design. Sizes, woods and finishes are specified per order, in open-pore, high-gloss or custom colour.

Updated 2026-09-24Sources

Staves, not plies

Almost every drum in this catalogue is a plywood cylinder: thin sheets of veneer, cross-grained, bent round a mould and glued. Troyan’s Professional shells are built the way a barrel is — solid wood cut into tapered staves and glued edge to edge around the circumference, then turned true.

The difference is grain direction. In a ply shell the grain runs every which way by design, because cross-lamination is what makes a thin bent cylinder stiff. In a stave shell the grain runs vertically, top to bottom, in every segment, and there is no glue line lying across the path the sound takes between the two heads.

What players report from stave drums is a fatter fundamental and a slower, more wooden decay. What can be said without argument is that there is far more solid wood in the shell and far less adhesive, and that the shell is thick where a ply shell is thin.

It is also a great deal more work. Each stave is cut to an angle set by the diameter and the stave count, and a single misjudged angle shows up as a gap around the whole drum.

Pinlock

The lugs are Troyan’s own, and the name describes the mechanism: the tension rod is retained by a pin rather than threading into a floating insert.

On a stave shell that matters more than it would elsewhere. A thick solid shell puts the lug mounting under a different load than a thin ply one, and a lug that holds the rod captive takes tuning stress in a predictable line rather than letting the receiver wander.

The same lug appears across most of the Troyan range, alongside a tube-lug option called Tubelock on several of the other lines.

Specified, not chosen

There is no size list on this page, and that is the product. Diameters, depths, wood species and finish are set per order, and the shop will cut a shell to a dimension no catalogue carries.

Finishes run to open-pore — oiled, with the grain left in relief — high gloss, or a custom colour. On a stave shell the open-pore option is the one that shows what the drum is: vertical grain running unbroken from edge to edge, with the stave joins visible as a ring of seams.

Troyan itself describes the line as the Rolls Royce among its drums, which is a maker’s claim about its own flagship rather than a finding. What the page states plainly is that this is where the shop puts its best work.

Where it fits

Players commissioning rather than buying: someone who already knows what size they want and what the wood should be, and wants a shell nobody else has.

Germany’s bespoke drum trade is small and thinly documented next to the American one, which makes a shop working this way — stave shells, its own hardware, one-at-a-time — worth recording on its own terms.

Specifications

Specifications
AttributeValue
Shell
Shell constructionStave — solid wood staves, barrel method1
Shell materialSolid wood, species chosen per order1
FinishesOpen-pore, high-gloss or custom colour1
Hardware
LugsTroyan Pinlock1
Build
ConfigurationSizes and woods specified per order1
Origin
Made inGermany1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Produkte — Troyan Professional Drums

    Troyan Zachow Drums · accessed 2026-09-24