Tama · Superstar Classic
Tama Superstar Classic Maple
The Tama Superstar Classic is a 100% maple kit on deliberately thin shells — 6-ply 5mm on toms and snare, 8-ply 7mm on the bass drum — with 45-degree back-cut edges and the Star-Mount suspension system. Exotic finishes substitute two outer plies of Lacebark Pine for maple.
Five millimetres
The headline number here is how little shell there is. Toms are 6 plies at 5mm — thinner than the Sonor AQ2’s 5.8, thinner than a Ludwig Classic Maple’s 6, and thinner than most kits costing several times as much.
Thin shells have less mass to set in motion. They speak at lower volume, produce a lower fundamental for a given diameter, and sustain longer. What Tama has done is put a genuinely professional shell specification into a mid-priced kit and save money elsewhere.
Where the money was saved is visible if you look: low-mass single-ended lugs rather than the double-ended cast lugs on the Starclassic, simpler finishes, and offshore manufacture. The shell itself is not where the compromise is.
Low-mass lugs are a feature, not a saving
Worth being clear about, because it reads like cost-cutting. Less metal bolted to a shell means less mass damping it, which on a thin shell matters more than on a thick one.
Tama uses twelve per rack tom and sixteen on the floor toms and bass drum — a lot of small lugs rather than a few heavy ones, which spreads the tension more evenly around the hoop while adding less weight overall.
Plenty of expensive kits use exactly this reasoning. Here it happens to be cheaper too.
The 45-degree back cut
A back cut is a second angle cut behind the bearing edge apex, on the inside of the shell. It moves the contact point toward the outside of the shell and reduces how much wood touches the head.
Less contact means a brighter, more open drum with more sustain and a sharper attack — the opposite direction to the Yamaha Recording Custom’s 30-degree R1.5, and the opposite of Tama’s own rounded collar edge on the Starclassic Walnut/Birch.
That is a real difference within one manufacturer’s range: the Superstar is the brighter, more open, more modern-sounding kit; the Starclassic is the warmer and more controlled one.
The Lacebark Pine question
The exotic finishes are not the same shell. Where a lacquer or plain wrap finish gets 6 plies of maple, an exotic finish gets 4 plies of maple plus 2 outer plies of Lacebark Pine, still at 5mm.
Tama publishes this, which is to its credit — most manufacturers quietly change the shell to carry a veneer and keep describing the kit by its headline wood.
Two softer outer plies will damp the shell slightly relative to all-maple. It is not a large difference, but if you are choosing between two Superstars on looks, know that you are also choosing between two shells.
What it sounds like
Open, bright and resonant, with long tom sustain and a bass drum that has more note than thud. The thin shells make it responsive, and it rewards good heads considerably.
Against the Sonor AQ2 the two are very close on paper and the Tama is the more open of the two. Against the Imperialstar below it in Tama’s own range, this is a much more serious instrument — poplar and basswood versus maple is the biggest single jump in the line.
Where it fits
The kit most often recommended to a player moving off their first drum set, and deservedly. The shell specification is professional; what you are giving up is hardware weight and finish options.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | 100% maple1 |
| Tom and snare plies | 61 |
| Tom and snare thickness | 5 mm1 |
| Bass drum plies | 81 |
| Bass drum thickness | 7 mm1 |
| Exotic finish shells | 4-ply maple + 2 outer plies Lacebark Pine, 5mm (7mm bass)1 |
| Bearing edge | |
| Bearing edge | 45° with back cut1 |
| Hardware | |
| Tom mount | Star-Mount suspension1 |
| Lugs | Low-mass single lugs — 12 per rack tom, 16 on floor toms and bass1 |
Where to find it
Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 2 · Higheditorial