Tama · Club-JAM
Tama Club-JAM Kit
The Club-JAM Kit is Tama's compact poplar four-piece, built around an 18 x 12 in bass drum with a cymbal holder mounted on the shell and curved vintage-style spurs. Shallow drums and a small footprint make it a working kit for clubs and rehearsal rooms rather than a scaled-down version of a stage kit.
What the sizes are for
An 18 x 12 in bass drum with a 10 x 7 in tom and a 14 x 7 in floor tom is a small kit by volume but a conventional one by voicing: three clearly separated pitches, with a 13 in snare sitting a little above where a 14 in would.
The shallow floor tom is the interesting choice. At 14 x 7 in it speaks faster and decays sooner than the 14 x 14 in floor tom most compact kits use, which is what keeps the kit tight in a room small enough that a long decay would simply build up.
Two shells, depending on finish
Tama builds the Club-JAM differently for the two finish families. The lacquer kits are a 7 mm shell — seven plies of poplar under a single outer ply of elm or phoenix tree — and the wrap kits are 8 mm of all-poplar in nine plies.
That is a real difference rather than a cosmetic one. The wrap shell is thicker and stiffer, so it is a little more focused; the lacquer shell has a decorative hardwood face and slightly more give. Both are poplar at the core, which is the wood that gives this kit its short, dry low end.
The bass drum carries the cymbal
The cymbal holder bolts to the bass drum shell rather than standing on the floor. That is a vintage idea — it is how kits were set up before the cymbal stand became universal — and on a kit this size it removes a tripod from a footprint that has no room for one.
Curved spurs finish the look. The practical effect is that the whole kit, cymbal arm included, packs down to fewer pieces than a conventional four-piece.
Where it fits
Below the Superstar Classic and beside the Stagestar in Tama’s range, but not really competing with either: those are full-sized kits at a price, and this is a small kit with a purpose. The nearest comparisons are the Club-JAM Flyer below it and the Cocktail-JAM beside it.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Poplar, with an elm or phoenix-tree outer ply on lacquer finishes1 |
| Plies | 8-ply on lacquer finishes; 9-ply on wrap finishes1 |
| Shell thickness | 7 mm17 mm on the lacquer finishes; the all-poplar wrap shells are 8 mm. |
| Hardware | |
| Bass drum hoops | Wood1 |
| Cymbal mount | Mounted on the bass drum shell1 |
| Build | |
| Configuration | Four-piece shell kit, LJL48S in lacquer or LJK48S in wrap1 |
| Origin | |
| Made in | China2*Tama's own page does not state the country; the retailer listing does. |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 2 · Highretailer listing