Drum Atlas
Menu

Sonor · Momentum

Sonor Momentum

  • Drum kit
  • pro
  • current
  • since 2025

Momentum is Sonor's German-made series introduced for the company's 150th year, built on the 9-ply, 6 mm medium shell from the SQ2 system and offered in beech, birch or maple with every drum available in every wood. It replaces both the SQ1 and ProLite lines, which were each locked to one material.

Updated 2026-09-24Sources

Depths that fall between the usual ones

Momentum uses what Sonor calls enhanced O.S.M.: shell depths deliberately set between the conventional sizes. A 12 in tom is 8.5 in deep, a 16 in floor tom is 15.25 in, a 22 in bass drum is 17.25 in.

The stated reason is two-fold — even intervals between drums, and comfortable positioning. The first matters musically: when depths step evenly, the pitch gap between adjacent toms stays consistent instead of widening at one point in the kit. The second matters physically: a fractionally shallower floor tom sits at a more natural height beside a seated player.

One shell, three woods

Every Momentum drum uses the same 9-ply, 6 mm shell that Sonor builds for the SQ2 system, and every size is offered in German beech, Scandinavian birch and North American maple. Because the sizes and the finishes match across all three, a player can specify the wood drum by drum.

Sonor’s own characterisation: beech is full and warm with balanced lows, mids and highs; birch is sharp and focused with strong projection; maple is mellow and warm with strong low frequencies. Mixing them within one kit — birch toms over a maple bass drum, say — is a possibility the range is explicitly built to allow.

Why it replaced two lines

Sonor says plainly that SQ1 was birch-only with lacquer finishes and ProLite was maple-only with veneers, and that both restrictions were creative limits rather than design decisions. Momentum collapses the two into one series where material and finish are independent choices.

For a buyer this is simpler. For the catalogue it means SQ1 and ProLite are now historical.

Hardware

T.A.R. tom mounts come from ProLite and the Sound Sustainer floor tom leg mounts from SQ1 — the latter isolating the leg so less of the drum’s energy disappears into the stage. Both are proven parts rather than new ones, which is consistent with a range assembled from a catalogue’s best existing ideas.

Specifications

Specifications
AttributeValue
Shell
Shell materialBeech, birch or maple, chosen per drum1
Plies91
Shell thickness6 mm1
Hardware
Tom mountT.A.R.1
Floor tom legsSound Sustainer mounts1
LugsSingle, with TuneSafe2*Sonor's page names TuneSafe across the range; the lug type for Momentum comes from the retailer listing.
Hoops2.3 mm steel2*
Build
ReplacesThe SQ1 and ProLite series1
Sizes shownThe Momentum 322 three-piece shell set2*
  • *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.

Where to find it

Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    MOMENTUM Drum Series

    Sonor · accessed 2026-09-24

  2. 2Tier 2 · Highretailer listing

    Sonor MOMENTUM 322 Maple Set GTB

    Thomann · accessed 2026-09-24