SJC Custom Drums · Tour Series
SJC Tour Series
The Tour Series is SJC's production line built in the same Massachusetts shop as its custom drums, on the company's M5 and M7 maple shells with hand-cut 45-degree bearing edges. It carries SJC shield lugs and wood badges, ships with Evans heads, and is offered in satin finishes with chrome hardware.
A production line from a custom shop
SJC’s business is made-to-order drums. The Tour Series exists because that model has a scheduling problem: a touring drummer who needs a kit in three weeks cannot wait for a custom build.
The company’s answer was to take its most commonly ordered specification — M5 and M7 maple shells, hand-cut 45-degree edges, shield lugs — and run it as a stock line through the same Massachusetts shop with the same people. What is given up is the choice; what is kept is the build.
Hand-cut edges
SJC is specific that the bearing edges are cut by hand rather than machined to a fixed profile. On a 45-degree edge that matters mostly for consistency around the circumference: a hand-finished edge is flattened and checked drum by drum, which is what allows a head to seat evenly without being forced down by tension.
The audible consequence is the one SJC claims — a pure, powerful tone with a clean attack — and the practical one is that the drums tune quickly and hold it.
Wood badges and satin finishes
The Tour Series is finished in either a matte black or a hand-rubbed natural satin, with chrome hardware and wood badges. Both finishes are thin and low in mass, so they leave the maple shell close to bare, which is consistent with the rest of the specification.
The UFO
The add-on list includes a 4 x 20 in drum SJC calls a UFO — a very shallow, very wide shell. Shaped that way it produces a low, short, dry note with almost no sustain, which is a specific effect rather than a general-purpose tom.
That it appears on the add-on list at all is the clearest sign of where this line comes from: production kits do not usually offer drums like this, but custom shops build them all the time.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Maple — SJC M5 and M7 shells1 |
| Bearing edge | |
| Bearing edge | Hand cut 45 degrees1 |
| Hardware | |
| Lugs | SJC shield; double-ended tube lugs on snares1 |
| Heads | |
| Stock heads | Evans1 |
| Build | |
| Badge | Wood1 |
| Built in | The same Massachusetts factory as SJC's custom shop drums1 |
| kit | |
| Add-on drums | 7 x 10 in rack tom, 16 x 18 in floor tom, second 18 x 22 in bass drum and a 4 x 20 in UFO1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec