Drum Atlas
Menu

Premier · Revolution

Premier Revolution

  • Drum kit
  • entry
  • current

Revolution is Premier's complete beginner kit: 7.5 mm, 6-ply poplar shells with 45-degree bearing edges and low-mass lug castings, supplied with every stand, a pedal, a throne, a 14 in hi-hat pair, a 16 in crash/ride and sticks. Two cymbal expansion packs let the set-up grow without replacing anything.

Updated 2026-09-24Sources

A beginner kit that expects to be added to

Two cymbal expansion packs are sold for the Revolution: one adds a 10 in splash and an arm, the other a 20 in ride and a boom stand. That is a small thing that says something about how the kit is designed.

Most beginner packages are terminal. The cymbals that come with them are not worth building around, and the hardware is not worth keeping, so the first upgrade means replacing everything. Offering a matched ride and a boom stand as accessories assumes the player will still be using this kit in a year, which changes what the kit has to be.

Poplar at 7.5 millimetres

Six plies of poplar at 7.5 mm is the standard entry-level shell, and Premier describes what it is after honestly: punch and articulation rather than resonance. A soft, thick shell gives a warm note with a short decay and limited projection.

The 45-degree bearing edge is doing the useful work. It improves head seating, which is what determines whether a beginner can get the drums in tune at all.

Low-mass lugs on an entry kit

Lug castings are one of the first places cost comes out of a cheap kit, usually by making them heavier and simpler. Premier fits low-mass castings, which put less metal against the shell and let a soft poplar drum ring a little more freely than it otherwise would.

Where it fits

Premier’s current entry point, below Artist. Its comparisons are the Pearl Roadshow, the Mapex Comet and the Gretsch Energy — all complete packages at similar money, all built on poplar. The expansion packs are the thing that distinguishes this one.

Specifications

Specifications
AttributeValue
Shell
Shell materialPoplar1
Plies61
Shell thickness7.5 mm1
Bearing edge
Bearing edge45 degrees1
Hardware
LugsLow-mass tension lug castings1
Build
Sizes shownThe PR22-5DK 22 in kit; a 20 in version is also offered1
kit
Hardware includedSnare, hi-hat and cymbal stands, single bass pedal, throne and sticks, double braced1
Cymbals14 in hi-hats and a 16 in crash/ride1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Revolution

    Premier · accessed 2026-09-24