
Pearl · Midtown
Pearl Midtown
Midtown is Pearl's compact four-piece: 6-ply poplar shells at 7.5 mm in wrap finishes, sized 16 x 14 in bass drum, 10 x 7 in tom, 13 x 12 in floor tom and a matching 13 x 5.5 in snare. It comes with a tom arm, a bass drum cymbal arm, a kick riser and a four-piece hardware set.
A note on sourcing
Pearl’s own website is not reachable from this project — blocker B6 — so every figure here comes from a retailer listing and is marked unverified. The two Midtown finish listings disagree slightly on shell thickness, 7.5 mm against 7 mm, which is recorded above rather than resolved.
A cymbal arm on the bass drum
Midtown mounts a cymbal arm on the bass drum shell as well as the tom arm. On a kit this size that removes a tripod from the footprint, which is most of the reason someone buys a compact kit in the first place.
The riser is the other piece of practical hardware. A 16 in bass drum on the floor puts the beater below the centre of the head, and raising the drum puts it back.
Small everywhere except the snare depth
A 16 x 14 in bass drum, a 10 in tom, a 13 in floor tom and a 13 in snare make a genuinely compact set-up. What is not scaled down is the snare depth: at 5.5 in it is a standard depth on a 13 in shell, which gives a crack with more body than a shallower drum of the same diameter.
That matters because the snare is doing most of the work of making a small kit sound like a proper one.
Six plies of poplar
Poplar at this price gives a warm, thick note with a quick decay and limited projection. On small drums that is a reasonable match — small shells are naturally bright, and a soft wood keeps them from sounding thin.
Where it fits
Pearl’s compact kit, complete with hardware and a snare in one box. Its comparisons are the Ludwig Breakbeats, which is a better shell without hardware, and the Tama Club-JAM Kit, which is a shell pack at similar money.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Poplar1*Pearl's own site is not reachable for this project; the specification comes from a retailer listing. |
| Plies | 61*Retailer-stated. |
| Shell thickness | 7.5 mm1*Retailer-stated for the Satin Black finish; the Pure White listing gives 7 mm. |
| Build | |
| Configuration | MT564 four-piece with matching snare1* |
| kit | |
| Included | Tom arm, bass drum cymbal arm and kick drum riser1*Retailer-stated. |
| Hardware included | HWP-50S set — hi-hat stand, snare stand, bass drum pedal and boom cymbal stand1*Retailer-stated. |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Where to find it
Some links below are affiliate links — if you buy through one, Drum Atlas may earn a commission at no extra cost to you. Commission never affects what we list or how we describe it. Full disclosure.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 2 · Highretailer listing