
Mapex · Saturn
Mapex Saturn VI
Saturn VI is the sixth generation of Mapex's maple and walnut hybrid kit, carrying SONIClear bearing edges and tom suspension, air-flow venting at the nodal line, and Design Lab floor tom hardware — static 90-degree legs, isolation gaskets and Sonic Pedestal feet that keep the steel leg off the floor.
Where the sixth generation puts its effort
The Saturn’s maple and walnut shell is now a long-standing design, and Saturn VI leaves the wood recipe alone. What has changed is everything that touches the shell: the mount, the legs, the feet and the vent holes.
That is a coherent position. Once a shell formula works, the remaining losses are mechanical — energy leaving the drum through hardware instead of turning into sound — and those are the losses this generation goes after.
Vents on the nodal line
Every vent hole is a hole in the shell, and where it goes matters. Mapex places the air-flow vents at the nodal line, level with the lugs, so they fall where the shell is moving least. The company credits the nodal positioning concept to Noble & Cooley.
Toms and bass drums get different vent counts, arrived at by testing rather than by rule. The vents set how quickly air can leave the drum, which governs how the head feels under the stick as much as how the drum sounds.
Floor tom legs that do not touch the floor
Three pieces of hardware work together here. The SAS static 90-degree leg takes the shortest path to the floor, on the reasoning that a longer path loses more energy. The lift bracket puts all the metal outside the shell, isolated by a rubber gasket, so the bracket is not clamping the drum. And the Sonic Pedestal foot holds the steel leg off the ground with an internal cotter pin, so the drum floats on rubber.
Taken together they are trying to stop a floor tom doing what floor toms do, which is dump a noticeable part of their low end into the stage.
What Mapex does not publish here
The Saturn VI product page states the shell material but not a ply count or thickness, so neither appears above. The component list — bass drums from 18 x 14 to 24 x 14 in, floor toms from 14 to 18 in, toms from 8 to 13 in and a 14 x 6.5 in snare — is the maker’s own.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Maple and walnut hybrid1 |
| Venting | Air-flow vents placed at the nodal line with the lugs1 |
| Bearing edge | |
| Bearing edge | SONIClear1 |
| Hardware | |
| Tom mount | SONIClear tom suspension, clear of the tension rods1 |
| Hoops | Triple-flanged power hoops1 |
| Floor tom legs | SAS static 90-degree legs with Sonic Pedestal feet and isolation gaskets1 |
| Build | |
| Sizes shown | One configuration assembled from the listed components; bass drums run 18 to 24 in1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec