Drum Atlas
Menu

Hallvad

Hallvad Cherry Custom Stave Shell Set

  • Drum kit
  • custom
  • current

The Cherry Custom Stave Shell Set is a three-piece Hallvad kit in solid American cherry staves — 12x8 tom, 14x10 floor tom and 20x14 bass drum, with shell walls of 8, 13 and 10mm respectively. Beech reinforcement rings 3mm thick sit inside; the hoops are pressed khaya mahogany, enamelled black against the cherry's natural grain.

Updated 2026-09-24Sources

Three different wall thicknesses in one kit

The rack tom is 8mm. The floor tom is 13. The bass drum is 10.

That is not a rounding artefact — it is a deliberate spread, and the ordering is the interesting part. The thickest shell in the kit is the floor tom, not the bass drum.

A thicker wall raises the shell’s fundamental and shortens its decay. On a 14 by 10 floor tom, which is small for its role and naturally inclined to ring long and loose, adding mass tightens it up and gives it a defined pitch it would otherwise struggle for. The 20-inch bass drum at 10mm gets the opposite treatment relative to its size: proportionally thinner, so it stays open.

A factory kit is one shell recipe scaled to every diameter. This is the freedom a stave shop has, used.

Staves and rings together

Hallvad builds stave shells — vertical solid staves glued edge to edge around the circumference, with as little adhesive as the joint allows, which is the shop’s stated reason for working this way.

Fitting beech reinforcement rings to a stave shell is a less common decision than it sounds. Stave shells are thick and already stiff, and many builders leave them ringless. A 3mm beech ring at each edge does two jobs here: it keeps a thin-for-a-stave 8mm tom round under tension, and it puts a harder, denser wood immediately behind the bearing edge.

Khaya hoops

The hoops are pressed khaya mahogany — laminated and formed rather than cut from a solid ring, which is how a wood hoop stays round.

Khaya is softer and more open-grained than beech or maple, and a hoop made of it is comparatively light. On cherry shells that keeps the whole drum on the warm, woody side of a rimshot.

They are finished in black enamel, so the eye reads the natural cherry as the instrument and the hoops as the frame.

Made once

This is a commissioned kit rather than a catalogue line, and Hallvad publishes no price list because, in its own words, no fixed list is possible: cost follows what the customer specifies.

What the shop offers instead is the method — solid stave shells in almost any species, wooden hoops in beech, mahogany, ash or maple, and finishes in matte or gloss polyurethane, oil or shellac. This kit is one answer to that, documented in enough detail to be worth recording.

Specifications

Specifications
AttributeValue
Shell
Shell materialSolid American cherry1
Shell constructionStave — vertical solid staves glued around the circumference2
Shell thickness8 rack tom, 13 floor tom, 10 bass drum mm1
Reinforcement ringsBeech, 3 mm1
FinishNatural cherry grain under satin lacquer, with hand-painted logo work on the tom1
Hardware
HoopsPressed khaya mahogany, black enamel1
HardwareMixed black and chrome, with custom mounting for tom holder, cowbell arm and an extended floor tom leg for a tambourine1
Heads
Batter headsRemo Emperor sand-coloured1
Resonant headsEvans; EQ2 Clear and EQ3 Coated on the bass drum1
Origin
Made inCzech Republic2

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Hallvad Cherry Custom Stave Shell Set

    Hallvad Drums · accessed 2026-09-24

  2. 2Tier 1 · Primarymanufacturer spec

    Produkty

    Hallvad Drums · accessed 2026-09-24