
DW · Design Series
DW Design Acrylic
The Design Acrylic is DW's first acrylic kit: 5 mm extruded seamless transparent shells fitted with the company's own hardware — STM suspension tom mounts, True-Pitch tuning, a MAG throw-off, graduated triple flange hoops and DW Heads by Remo — in F.A.S.T. tom sizes.
Extruded, not rolled
Acrylic drum shells are made two ways. A rolled shell starts as a flat sheet bent into a cylinder and joined, leaving a seam; an extruded shell is formed as a tube with no join at all.
DW uses extruded shells here, 5 mm thick. A seam is a discontinuity in stiffness, and a shell without one is more uniform around its circumference — which on a material as rigid as acrylic is audible as a more even response wherever the head is struck.
Graduated hoops on an acrylic kit
The triple flange hoops come in graduated weights, thicker on the larger drums. That detail matters more here than it would on wood.
An acrylic shell contributes very little damping of its own, so the hoop is a larger share of what controls the head’s edge. Matching hoop mass to drum size keeps the 10 in tom from being over-clamped and the 16 in floor tom from being under-clamped, which is how the kit stays even across its range.
F.A.S.T. sizing
The toms are DW’s Fundamentally Accurate Sized depths: 8 in on a 10 in tom, 9 in on a 12 in. Shallower shells put the air column’s resonance closer to the head’s fundamental, so the drums speak faster and hold a clearer pitch.
On acrylic that is worth more than usual. An acrylic drum’s sound is almost entirely the head, so anything that makes the head’s behaviour cleaner shows up directly.
Where it fits
DW’s first acrylic kit and the only one in the catalogue. Against the PDP Concept Acrylic, which uses acrylic hoops for more overtone control, this is the brighter and more open of the two; against a Ludwig Vistalite it is the thinner-shelled and the more modern in hardware.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Acrylic1 |
| Shell thickness | 5 mm1 |
| Seam | Seamless, extruded1 |
| Hardware | |
| Tom mount | STM suspension tom mount1 |
| Hoops | Chrome steel triple flange, graduated by drum size1 |
| Lugs | Mini-turret1 |
| Heads | |
| Stock heads | DW Heads by Remo1 |
| Build | |
| Tom sizing | F.A.S.T. — Fundamentally Accurate Sized Toms1 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec