Drum Atlas
Menu

DW · Collector's Series

DW Collector's SonicPly

  • Drum kit
  • flagship
  • current

SonicPly is DW's hybrid metal and maple shell: a 9-ply 333 maple shell with a 1/36 in aluminium sheet in place of the middle ply, on drums from 10 to 24 in. Toms are cut at 45 degrees and bass drums at 60, and the result sits higher, brighter and shorter than pure maple.

Updated 2026-09-24Sources

Metal where a ply should be

SonicPly replaces the middle ply of a 9-ply maple shell with a sheet of aircraft-grade aluminium 1/36 in thick. The maple either side of it is unchanged: it is DW’s 333 shell, the same one the Pure Maple Collector’s drums use.

Aluminium is far stiffer and denser than maple, so putting it at the shell’s neutral axis raises the cylinder’s stiffness without adding much thickness. A stiffer shell resonates higher and releases the head’s energy faster, which is precisely what DW reports: against a Pure Maple 333 drum, SonicPly is higher in pitch, brighter and shorter in sustain.

The stated aim is the thick punch of pure maple with the dry sustain of aluminium, and the mechanism supports the claim rather than merely asserting it.

Snares get two sheets

The snare drum shell is different: twelve plies of maple with two aluminium sheets sandwiching the middle plies rather than one replacing them. A snare is struck harder and asked for more attack than a tom, and doubling the metal pushes the shell further towards the metallic end.

Two edge angles

Toms are cut at 45 degrees, bass and snare drums at 60. DW’s reasoning is straightforward: the sharper tom edge frees the head for tonality and sustain, while the broader 60-degree edge on the larger drums seats more head against wood for depth and punch.

Sixty degrees is the steeper cut in DW’s terminology — more head resting on the shell, not less — which is why it lands on the drums that need weight rather than ring.

Two years of development

DW credits John Good and the Custom Shop team with two years of work on the shell, which is consistent with the scale of the problem: bonding metal to wood in a moulded cylinder is straightforward to describe and difficult to make consistent across every diameter and depth a custom shop has to build.

Like the rest of the Collector’s Series, SonicPly is specified drum by drum, with any of DW’s finish families applied over it.

Specifications

Specifications
AttributeValue
Shell
Shell materialMaple with an aluminium core ply1
Plies9 — 9-ply 333 maple with a 1/36 in aluminium sheet replacing the middle ply1SonicPly snare drums use a 12-ply maple shell with two aluminium sheets around the middle plies.
Bearing edge
Bearing edge45 degrees on toms; 60 degrees on bass and snare drums1
Build
Sizes shownThe 10/12/14/16/22 exotic five-piece as configured; SonicPly is available across the Collector's Series1
Built inDW's Custom Shop1
drum
Against pure mapleHigher in pitch, brighter in tone and shorter in sustain than a Pure Maple 333 shell1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Collector's SonicPly 5-Piece Exotic Kit

    Drum Workshop · accessed 2026-09-24