
Dixon · Spark
Dixon Spark Birch
Spark Birch is the step-up half of Dixon's Spark range: a 6-ply birch five-piece in satin lacquer with a mini tom suspension system, ball-and-socket tom holders and deluxe bass drum spurs. Birch gives the kit a brighter, more punchy voice than the poplar Spark Standard beside it.
The wood is the step up
Spark is sold in two forms, and the difference between them is the shell. Spark Standard is 6-ply poplar with wrap finishes; Spark Birch is 6-ply birch with satin lacquer.
Birch is denser and stiffer than poplar, and its frequency response has a characteristic lift in the upper mids with a tighter low end. In practice that means Spark Birch cuts through a band more readily and records with less work, which is what “step-up features” amounts to at this price.
A suspension mount on an intermediate kit
Dixon fits a mini tom suspension system rather than bolting the tom bracket straight to the shell. The mount holds the drum by its tension rods or hoop so the shell is free to vibrate, and on a birch tom — a shell that rings readily — the gain is audible.
The ball-and-socket holder is the practical half of the same feature: it sets angle and position in one movement instead of two, which matters on a kit that is set up and struck often.
Satin lacquer and a contrasting hoop
Three of the four finishes are satin lacquer over the birch, with a bass drum hoop finished differently from the shells. A satin lacquer is thin and adds little mass, so it leaves the shell closer to bare wood than a wrap does — one more small difference between Birch and Standard.
Where it fits
Above Spark Standard and below Cornerstone in the Dixon range. Cornerstone moves to a different shell and hardware grade entirely; Spark Birch is the point at which the range stops being a first kit and starts being a working one.
Specifications
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec