Drum Atlas
Menu

C&C Drum Co. · Maple Gum

C&C Maple Gum

  • Drum kit
  • custom
  • current

Maple Gum is C&C's 6-ply maple/gum/maple shell at 6 mm, with the inner maple ply running horizontally for strength and brightness. Batter edges are the company's Bread & Butter profile and resonant edges are Full Contact, a deliberate asymmetry that widens the tuning range.

Updated 2026-09-24Sources

Two different edges on one drum

Most drums are cut the same way top and bottom. Maple Gum is not: the batter side gets C&C’s Bread & Butter edge and the resonant side gets a Full Contact edge.

The two do opposite jobs. A Full Contact edge rests a large area of head on the shell, which damps the resonant head slightly and ties it more closely to the shell — more fundamental, less overtone wash, and a more consistent response across the drum’s range. A Bread & Butter edge on the batter side keeps the struck head freer, so the attack stays open.

C&C’s stated reason is a wider tuning range and better consistency across the spectrum, and the mechanism supports it: the resonant head is the one that usually decides where a drum stops sounding good, so controlling it is where the range comes from.

The horizontal inner ply

The inner maple ply runs horizontally rather than following the rest of the shell’s grain direction. Cross-orienting a ply is standard plywood practice for strength; C&C also credits it with adding tonal brightness, which follows from the extra stiffness it gives the cylinder.

Gum in the middle

Gum — sweetgum — is a medium-density American hardwood with an interlocked grain, softer than maple and warmer in the mids. Sandwiched between maple plies it does roughly what poplar does in the 12th & Vine shell, but with more body: C&C’s summary of the result is bright and warm, aimed at the loud, vintage 1960s and 1970s sound with plenty of low end.

Built to order

Toms, floor toms and bass drums are each available in a choice of depths, in matte or gloss, with a high-gloss option above that. The sizes recorded are the Bebop configuration.

Specifications

Specifications
AttributeValue
Shell
Shell materialMaple and gum — maple/gum/maple1
Plies61
Shell thickness6 mm1
Grain orientationInner maple ply runs horizontally1
Bearing edge
Bearing edgeBread & Butter on the batter side; Full Contact on the resonant side1
Hardware
Hoops3 mm triple flanged1
LugsC&C single-ended Deco1
Bass drum spursModern telescoping1
Build
Sizes shownThe Bebop pack; Jazzette and larger configurations are also offered, with a choice of depths1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Maple Gum Drums

    C&C Drum Company · accessed 2026-09-24