
Bucks County Drum Co · Prime
Bucks County Prime Series
The Prime Series is Bucks County's single-species kit: six- or eight-ply shells in one wood all the way through — ash, birch, cherry, mahogany, maple, oak or walnut — with 2.3mm triple-flanged hoops and a choice of full-length tube or beavertail lugs. Four named three-piece configurations run from an 18-inch bass drum to a 24.
One wood, all the way through
Almost every professional ply shell is a mixture. Maple outside and mahogany inside, birch cores under maple faces, a walnut outer veneer over something cheaper — the layup is where most makers put their design thinking.
Bucks County goes the other way. The Prime shell is 100% the same species in every ply, and the shop’s stated belief is that a great and resonant drum can be built from one premium timber.
What that buys is a drum whose character is legible. A mixed shell’s voice is an average of its woods and of how they are ordered; a single-species shell sounds like the wood it is made of. Choose cherry and you get cherry — bright, quick, light — rather than cherry moderated by whatever is underneath it.
Seven woods are offered, and they are genuinely different instruments: ash is springy and cutting, mahogany warm and low-mid heavy, oak hard and loud, birch scooped, cherry fast, walnut dark, maple even.
Six plies or eight, and the edge that comes with it
The ply count is a choice, and it is not just about thickness — each count comes with its own edge.
Six-ply shells get reinforcement rings and a round-over bearing edge. Thinner shell, more movement, a broad contact patch at the head: warm, round, vintage-leaning, with the rings holding the shell true.
Eight-ply shells get double 45-degree edges and no rings. Thicker shell, less movement, a narrow contact patch: brighter, more projecting, more sustain in the head rather than in the wood.
Those are the two poles of shell design offered as a single question at the point of order, which is unusually clear. Most makers pick one and build a line around it.
Four kits with names
Maestro, Artisan, The Jack, The Hero — four three-piece configurations spanning the whole useful range of drumset sizes.
The Maestro is the small one: 15 by 18 bass drum, 13 by 14 floor tom, 8 by 12 rack. A jazz and small-room kit. The Artisan steps up to a 16 by 20 with a 14 by 15 floor tom. The Jack is the all-rounder at 15 by 22 with a 15 by 16 floor tom. The Hero takes the bass drum to 14 by 24 — big diameter, shallow depth, which is the vintage recipe for a drum that is huge without being slow.
Matching snares are listed at $599 against a kit price of $2,295 to $2,695, which is the shop quietly making it easy to have the snare cut from the same log as the rest.
Finishes, priced honestly
Satin is the standard and costs nothing. A single colour stain adds $150, a burst or fade $300, a wrap $400, gloss $500, and a gloss burst or fade $600.
Publishing that ladder is a small act of transparency worth noting. Finish work is where custom drum prices usually disappear into “call for a quote”, and a shop that lists the increments is telling you exactly what the shiny version costs before you ask.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | One species throughout — ash, birch, cherry, mahogany, maple, oak or walnut1 |
| Plies | 6-ply toms; 8-ply toms1Bucks County offers the Prime shell in either count; the six-ply build carries reinforcement rings and a round-over edge, the eight-ply has double 45s and no rings. |
| Reinforcement rings | Fitted on the 6-ply build; omitted on the 8-ply2 |
| Bearing edge | |
| Bearing edge | Round-over on the 6-ply; double 45° on the 8-ply2 |
| Hardware | |
| Hoops | 2.3 mm triple-flanged1 |
| Lugs | Full-length tube, or beavertail1 |
| Hardware finish | Chrome, brass or black nickel1 |
| Origin | |
| Made in | United States2 |
| kit | |
| Configurations | Maestro 8×12, 13×14, 15×18; Artisan 8×12, 14×15, 16×20; The Jack 8×12, 15×16, 15×22; The Hero 9×13, 15×16, 14×241 |
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 1 · Primarymanufacturer spec