Drum Atlas
Menu

British Drum Company · Raven

British Drum Co. Raven Kit

  • Drum kit
  • intermediate
  • current

Raven is the most affordable British-built kit British Drum Co. makes: cross-laminated birch ply cold-pressed in the company's own moulds, 8-ply on toms and floor toms and 11-ply on bass drums, with a precisely cut 45-degree bearing edge and a single Art Deco Palladium lug.

Updated 2026-09-24Sources

Cold-pressed, at the bottom of the range

British Drum Co. forms its shells by cold-press moulding rather than by heating them, and the Raven uses the same process as the Legend and Lounge series above it.

That is the notable claim. Heat-pressing is faster and cheaper; cold-pressing holds the plies under pressure for longer without cooking the adhesive, which the company argues gives a more stable shell. Carrying it down to the cheapest kit in the range means the difference between Raven and Legend is in materials and hardware rather than in how the shells are made.

Eight plies of birch, eleven on the kick

Cross-laminated birch at eight plies is a stiff, fairly thick shell. Birch’s characteristic upper-midrange lift plus a stiff cylinder gives a kit that projects hard, which is what the company means by performance that defies its cost.

Bass drums step up to eleven plies. A 22 in shell carries several times the total head tension a 12 in tom does over a much longer span, so the extra plies are structural before they are tonal.

Isolation without a suspension mount

Rather than fitting a separate suspension mount, British Drum Co. fixes the brackets to the shell through a bespoke isolation system. The bracket is still attached to the drum, but the metal is not clamping the wood directly.

It is a middle position between a direct mount and a full suspension system: less resonance lost than a bolted bracket, more positional security than a mount that hangs the drum.

One finish, one configuration

Raven is sold in Black Ash satin with a black satin lacquered interior, as a Club 22 kit — 12 x 8 in tom, 16 x 16 in floor tom, 22 x 16 in bass drum — with two add-on drums available. The narrow range is the cost control.

Where it fits

The entry point to British Drum Co. and a genuinely British-built kit at that price, which is unusual. Legend and Lounge above it move to different shell recipes and the full-size Palladium lug.

Specifications

Specifications
AttributeValue
Shell
Shell materialBirch ply, cross-laminated1
Plies8-ply toms and floor toms; 11-ply bass drums1
Shell interiorBlack satin lacquer1
Bearing edge
Bearing edge45 degrees1
Hardware
LugsSmall single Palladium, Art Deco inspired1
BracketsFixed through a bespoke isolation system1
Build
Shell formingCold-press moulding, shared with the Legend and Lounge series1
Sizes shownThe Club 22 pre-configured kit; a 10 x 7 in tom and a 14 x 14 in floor tom are offered as add-ons1

Sources

Numbered footnotes in the spec table point here.

  1. 1Tier 1 · Primarymanufacturer spec

    Raven Drum Kit

    British Drum Co. · accessed 2026-09-24