The concert outfit was the Kraslice kit aimed at working players rather than beginners: a 22x16 bass drum two inches deeper than the standard one, square power toms from 10x10 to 14x14, 16 and 18 in floor toms, and a square-tube rack of the kind Pearl was selling at the time.
Catalogue record. This entry carries specifications and their sources, and no written assessment — nobody has written one yet. Everything in the table below is sourced and marked the same way as anywhere else on the site. For entries that explain the design rather than only record it, see the anatomy pages or any model marked as a full entry.
Specifications
| Attribute | Value |
|---|---|
| Shell | |
| Shell material | Beech plywood1 |
| Shell thickness | 10 mm1Bass drum. Toms and floor toms are about 7mm. |
| Hardware | |
| Rack | Square-tube rack resembling Pearl's, with longer tom holders for the concert configuration1The clamps fit only Amati's own holder diameter, so they do not interchange with other makers. |
| Snare side | |
| Snare drum supplied | 14x6.5 deep snare; a 14x8 is recorded but rare1 |
| Build | |
| Configuration | 22x16 bass drum; 10x10, 12x12, 13x13 and 14x14 power toms; 16x16 and 18x16 floor toms; 6 and 8 in bongos1 |
| Less typical sizes | Hanging 14x10 and 13x11 toms1* |
| Origin | |
| Made in | Czechoslovakia — Kraslice1 |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Reported shortcomings
Collected from owner reports, forum threads and reviews. These are what players say about the Amati Concert Outfit — not measurements we have taken, and not necessarily typical. A problem appearing here does not mean it will affect yours.
A number of players report that bearing edges arrived rough enough that owners commonly recut or dressed them1
The plywood itself was reported largely free of knots and flaws; it was the finishing at the edge that owners corrected.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 3 · Secondaryeditorial
