Zildjian · K Custom
Zildjian K Custom 18" Dark Crash
The Zildjian K Custom 18" Dark Crash is a thin B20 cast bronze crash, over-hammered for a fast decay. Zildjian describes a dark, full-bodied crash with a quick bright attack, and says the hammering lets a heavier crash respond like a thinner one while keeping more volume in reserve.
What over-hammering does
Hammering is not only decorative. Working the metal harder relaxes it, so a cymbal with more hammer strikes in it flexes more readily than its weight alone would suggest. Zildjian’s own claim for this line is exactly that: the technique lets a heavier crash respond like a thinner, lighter one while keeping more volume available.
At 18 inches the audible result is a crash that opens quickly, hits dark and full, and then shuts down faster than a dark cymbal usually does.
A bright attack on a dark cymbal
The attack is described as quick and bright and the body as dark and full, which sounds contradictory and is not. The initial transient carries high-frequency content; what follows it is low and complex. That separation is what lets the cymbal cut through a mix and still read as dark once it has spoken.
Against the K Dark Thin Crash
The standard K Dark Thin at 18 is the simpler cymbal: dark, low, quick. The K Custom Dark is over-hammered, so it has more nuance in the decay and more volume available when pushed. It is also the more expensive answer to a similar brief, and on a quiet stage the difference is smaller than the price suggests.
Specifications
| Attribute | Value |
|---|---|
| Cymbal | |
| Type | Crash1 |
| Alloy | B20 bronze — 80% copper, 20% tin, traces of silver2*Zildjian publishes no alloy on its own site and calls the recipe its Secret Alloy; Modern Drummer gives the composition of the B20 bell bronze the cast lines are poured from. |
| Weight | Thin1 |
| Hammering | Over-hammered, for extra fast decay1 |
| Character | Dark and full-bodied with a quick bright attack, projecting with more character and nuance1 |
| Catalogue number | K09531 |
| Origin | |
| Made in | United States3Zildjian: all instruments made in the USA, cymbals at the Norwell, MA factory. |
- *Not yet checked against a published source. Where a numbered source is given, it is on record but has not been opened and confirmed. See how we source.
Sources
Numbered footnotes in the spec table point here.
- 1Tier 1 · Primarymanufacturer spec
- 2Tier 2 · Higheditorial
- 3Tier 1 · Primarymanufacturer spec